Honda Civic Hatch 2017 Owner's Manual page 643

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
uuJump StartinguJump Starting Procedure
1What to Do After the Engine Starts
The indicators for the Adaptive Cruise Control
(ACC) * , Adaptive Cruise Control (ACC) with Low
Speed Follow (LSF) * , Road Departure Mitigation
(RDM) * , Vehicle Stability Assist (VSA®) System,
Vehicle Stability Assist (VSA®) OFF, low tire Pressure/
TPMS * and Collision Mitigation Braking System
(CMBS TM ) * may come on when you turn the ignition
switch to ON ( w *1 after reconnecting a battery.
Drive a short distance at more than 12 mph (20
km/h). Each indicator should go off. If none of them
do, have your vehicle checked by a dealer.
TM
641