Advertisement
2. Operation instruction
Before setting the menu functions, please make sure the device is connected
correctly, Power on the unit, switch the dial to the ON position. According to
the input signal, make sure to adjust the display's input to display the proper
display on the LCD screen.
2.1 Button instructions:
: Power on/off
MODE: Signal Switch Button
MENU: Menu button
F3. F4: Custom button, enter the OSD menu of the F secondary menu,
operate" >" on the unit to select, then using "v/F1" or "^/F2" to select,
Press "MENU" button to custom Settings.
v/F1: Multi button, In OSD Menu for down adjustment, it can be custom button
when not in OSD. See F4.
^/F2: Multi button. in OSD Menu for up adjustment, it can be custom
button when not in OSD, See F4.
>: Volume up, in OSD menu to increase the value of analog in the menu.
<: Volume down, in OSD menu to decrease the value of analog in the menu.
2.2 Menu instructions
image color (including 2 page menu, use "v/F1" or "^/F12" to enter).
Pic. Mode
Brightness
Contrast
Saturation
Sharpness
Color Temp.
Red
Green
Standard
50
50
50
0
6500
136
123
Blue
Tint
7
128
50
Advertisement
