Table of Contents
Advertisement
Troubleshooting
Problems
The screen of the video magnifier
goes dark.
The video magnifier can't be
turned on.
The image of the video magnifier is
too dark or too bright.
The image of the video magnifier is
blurred or dirty.
The reading characters on the video
magnifier is too small.
When the video magnifier is
connected to TV, but TV has no
display.
Oasis Scientific Inc.
www.oasisscientific.com
info@oasisscientific.com
1-864-469-0919 (Tel)
Portable Digital Video Magnifier
Solutions
Make sure that the power key is
pushed to the place of "ON".
Try to push the power key to the
place of "OFF" and then push
back to the place of "ON".
The battery maybe has no power,
please charge it.
Make sure that the focal point of
the lens is aimed at the reading
materials.
The battery maybe has no power,
please charge it.
Make sure the focal point of the lens
is aimed at the reading materials. Make
sure the right lens (distance lens) is
chosen appropriately.
Clean the LCD and the lens shield.
Make sure the lens (distance lens)
is chosen appropriately and
protection films are removed
.
Press zoom in key to zoom in.
Make sure TV is turned up. When
using AV line, please switch the TV
input source to right AV input.
When using HDMI line, please switch
the TV input source to HDMI input.
Make sure the video line is correctly
connected to the video magnifier and
TV.
13
Advertisement
Table of Contents
