Checking Preset Code; Operating Other Pioneer Components - Pioneer VSX-D710S Operating Instructions Manual

Controlling the Rest of Your System
Checking Preset Codes
To check which preset code is associated with a MULTI
CONTROL button:
VSX-D710S/D810S:
1 Press SETUP and hold for three seconds.
The LED on the remote control lights for two
seconds.
2 Press the MULTI CONTROL button you
want to check the preset code for.
3 Press and hold ENTER for two seconds.
Each preset code consists of four digits, for example
1329. Each digit will be represented by a series of
blinks on the remote' s LED—3 blinks to represent
the digit "3", etc. ("0" is represented by 10 blinks.)
VSX-D850S:
1 Press and hold for three seconds the MULTI
CONTROL button you want to check the
preset code for.
The preset code appears in the remote' s LCD display.
40
En
Operating other Pioneer
Components
By connecting a control cord (optional), you can control
other Pioneer equipment using this remote control unit.
Point the remote control unit towards the remote sensor
of this unit, even when operating other equipment.
OUT
CONTROL
VSX-D850S
Remote control unit
The remote control signals are received by the remote
sensor of this unit, and sent to the other devices via the
terminal.
CONTROL OUT
MEMO:
• You can also control Pioneer components by pointing
the receiver's remote control directly at the
component. This type of operation does not require
control cords.
CONTROL
IN
OUT
Other Pioneer products
with Î mark
Connect to CONTROL IN
terminal of other Pioneer
products with Î mark.