Displays & Controls; Front Panel - Pioneer VSX-C300 Operating Instructions Manual

Displays & Controls
03

Front Panel

1 2
STANDBY
OFF ON
PHONES
9
1 — OFF/ _ ON (Main power) button
Press this button to the ON position so that the
power button on the remote control will be opera-
tional. If the button is OFF (—), the power of the
receiver is shut off and the RECEIVER
the remote control does not function. When this
button is ON, the power button on the remote
control toggles between ON and STANDBY mode.
2 STANDBY indicator
Lights when the receiver is in standby mode. The
receiver uses a small amount of electricity (1W) in
standby mode.
3 INPUT SIGNAL indicators
Indicates the kind of input signal.
DIGITAL :
When a digital source is input this indicator will
light.
MULTI :
When a multichannel source is input this indicator
will light.
4 DECODE MODE indicators
Indicates how the signal is being decoded.
2 PRO LOGIC:
Lights when 2 PRO LOGIC decoding is in use.
2 DIGITAL:
Lights when playing a 2 DIGITAL sound source
DTS:
lights when playing a DTS sound source .
MPEG:
Lights when playing an MPEG source.
5 2 Ch Listening Mode indicators
When these indicators are lit sound is only coming
from the front speakers (and possibly the subwoofer
in some settings) or headphones.
18
En
3
INPUT SIGNAL
DIGITAL
FRONT INPUT
VIDEO L AUDIO R DIGITAL IN
8
STEREO
TUNED
~
MONO
RDS
RF ATT
button on
4 5
VIRTUAL
2 2
PROLOGIC DIGITAL DTS MPEG PHONES SURR. STEREO
=
VIRTUAL/PHONES SURR.:
Lights when the VIRTUAL or PHONES SURR.
listening modes are selected.
STEREO: Lights in stereo mode.
6 MASTER VOLUME
Use to set the overall listening volume.
7 Input buttons
Use to select the playback source: the possibilities are
DVD, TV/SAT, VCR, TUNER and FRONT.
8 FRONT jacks
You can connect a portable DVD player, video
camera, video game system, or whatever equipment
you would like to have handy, to the
(refer to page 13).
9 PHONES jack
Use to connect headphones (this switches the
speakers off).
0 Volume level indicator
- MIDNIGHT indicator
Lights when Midnight Listening mode is on.
= CHARACTER display
Shows the current input (DVD, TV/SAT, etc.),
listening mode, radio frequency, etc.
~ TUNER indicators
STEREO: Lights when a stereo FM broadcast is being
received in auto stereo mode.
TUNED: Lights when a broadcast is being received.
MONO: Lights when the mono mode is set using the
MPX button.
RDS: Lights when an RDS broadcast is received.
RF ATT: Lights when the RF ATT is on (see p. 33).
6
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-C300
DVD TV/SAT VCR TUNER FRONT
DOWN
7
d B
- 0
FRONT
DISPLAY
MASTER
VOLUME
UP
jacks