Pioneer VSX-916-K Operating Instructions Manual page 26

05 Controls and displays
4 Tuner/component control buttons/ SETUP
The following button controls (except SETUP)
can be accessed after you have selected the
corresponding MULTI CONTROL button
(DVD, AM, FM, TV, etc.)
TOP MENU – Displays the disc 'top' menu
of a DVD.
MENU – Displays the disc menu of DVD-
Video discs. It also displays TV menus.
T.EDIT – Press to memorize and name a
station for recall (page 46).
SETUP (Press RECEIVER first to access)
Use to access the System Setup menu (see
page 36).
GUIDE – Displays the guides on a digital
TV.
PTY SEARCH – Use this button to search
for RDS program types (page 47).
RETURN – Press to confirm and exit the
current menu (also use to return to the
previous menu with DVDs).
5 (TUNE/ST +/–) / ENTER
Use the arrow buttons when setting up your
surround sound system (see page 36). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use
the TUNE /
frequencies and use ST
stations (page 46).
6 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CTRL button (see page 50 for more on
this).
TV
– Use to turn on/off the TV power.
TV VOL +/– – Use to adjust the TV volume.
INPUT SELECT – Use to select the TV input
signal.
TV CH +/– – Use to select channels.
26
En
buttons to find radio
/
to find preset
7 Component control buttons
The main buttons ( ,
control a component after you have selected it
using the MULTI CONTROL buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding MULTI CONTROL button (for
example DVD or DVR).
MPX – Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality (page 45).
EON – Use to search for programs that are
broadcasting traffic or news information
(page 48).
AUDIO – Changes the audio language or
channel on DVD discs.
DISP – Switches between named station
presets and radio frequencies (page 46). It
also displays RDS information (page 47).
SUBTITLE – Displays/changes the subtitles
included in multilingual DVD-Video discs.
CH +/– – Use to select channels when
using a TV, VCR, DVR, etc.
The following DVR controls can be accessed by
pressing SHIFT:
REC – Starts recording.
REC STOP – Stops recording.
JUKEBOX – Switches to the Jukebox
feature.
HDD/DVD – These buttons switch between
the hard disk and DVD controls for DVD/
HDD recorders.
8 RECEIVER CONTROL buttons
STANDARD – Press for Standard decoding
and to switch between the various Pro
Logic IIx and Neo:6 options (page 28).
ADV.SURR – Use to switch between the
various surround modes (page 29).
STEREO – Selects stereo/direct playback
(page 30). Also selects the Auto Surround
mode (Auto playback on page 28).
, etc.) are used to