CONTENTS Warranty Power Tools Warranty Introduction For full details please visit us at www.909.com Environmental protection Description of symbols Specifications General safety rules Additional safety rules for blowers Additional safety rules for the charger Additional safety rules related to the battery pack and battery safety...
Manual before using your new 909 Power Tool. Take special care to heed the Cautions and Warnings. Your 909 power tool has many features that will make For safe operation read instruction manual. your job faster and easier. Safety, performance, and...
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord WARNING. Read all safety warnings and all instructions. suitable for outdoor use reduces the risk of electric shock. Failure to follow the warnings and instructions may result in 3) Personal safety electric shock, fire and/or serious injury.
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will 5) Battery tool use and care do the job better and safer at the rate for which it was a) Ensure the switch is in the off position before...
Additional safety rules for the charger dust, lint, hair and other material that may cause a • Your 909 tool with Lithium-Ion batteries may only reduction in air flow. be charged with the specific designed 909 Lithium h. Keep a balanced and stable stance while using Ion battery charger purchased with the tool.
Page 7
• Do not place any object on to, or allow anything to rest • Do not plug anything other than your 909 tool into the on the charger. charger, as other objects may touch dangerous voltage •...
Due to modern mass production techniques, it is unlikely in this manual. that your 909 Power Tool is faulty or that a part is missing. Another feature of the blower/battery pack is the low If you find anything wrong, do not operate the tool until the voltage cut out feature.
1. Align and slide the slim line Fitting and removing the battery pack adaptor onto the battery To remove the battery pack until the battery pack latches from the blower firmly press the “click” into position. Check battery release tabs (4) at either the adaptor is flush with the side of the battery pack, and slide battery and there is a firm...
Avoid charging, using or storing your battery in Operation of the blower temperatures below 0ºC and above 40ºC. Hold the blower firmly and rotate Attaching the blower tube from side to side, holding the tube several inches above the CAUTION. Always ensure that ground.