CONTENTS Introduction Warranty Power Tools Environmental protection For full details please visit us at www.909.com Description of symbols Specifications Safety instructions Additional safety rules for blower vacs Unpacking Know your product Assembly Operation of the blower vac Tips for using your blower vac...
Manual before using your new 909 Power Tool. Take special care to heed the Cautions and Warnings. Conforms to relevant standards for Your 909 power tool has many features that will make electromagnetic compatibility. your job faster and easier. Safety, performance, and Warning.
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a WARNING. Read all safety warnings and all instructions. cord suitable for outdoor use reduces the risk of electric Failure to follow the warnings and instructions may result in shock.
g) If devices are provided for the connection of dust knowledge, unless they have been given supervision or extraction and collection facilities, ensure these are instruction concerning use of the appliance by a person connected and properly used. Use of dust collection responsible for their safety.
Page 6
Keep all the air intakes and the blower tube free of dust, Do not try to repair the tool or access internal parts. • • lint, hair and other material that may cause a reduction Contact authorised service centres only. in air flow.
Unpacking Due to modern mass production techniques, it is unlikely that your 909 Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Assembly The blower vacuum requires some assembly prior to use for the first time This includes the fitting of the blow/vac tube to the housing and the fitting of the collection bag. Assemble the tube and wheel bracket 1 Insert the lower tube to the upper tube and screw them together.
Operation of the blower vac Prior to using the blower vac, ensure you have read and understood this instruction manual. Ensure you are wearing suitable clothing and also safety equipment like safety glasses, ear protection and a mask if necessary. Ensure the attachments to the blower vac are correctly fitted and adjusted.
Important: Important notes when using the blower/vacuum After you have turned the blower vac off, do not selector lever: leave the product unattended or connected to the extension cord. Do not force the lever. The lever should move with very little resistance.
For better performance and comfort, it is recommended • Extension cord support the collection bag is emptied when it becomes During use of the blower vac, the extension cord will approximately half full. This reduces the weight and also continually be pulled as you move from one area to another. allows the vac operation to perform at its highest level.