Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer VSX-1016TXV-K Operating Instructions Manual

Other connections
Important
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won't be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Assign menu on page 46 and SR+ Setup for Pioneer
plasma displays on page 48 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
VIDEO
Pioneer plasma
INPUT 1
display
DVD player
DVD/LD
AUDIO IN
STANDBY / ON PHASE
CONTROL
DIGITAL PRECISION PROCESSING
PHASE ACOUSTIC LISTENING
CONTROL EQ MODE DVD/LD TV /SAT DVR /VCR1 DVR /VCR2 VIDEO/GAME
ENTER
MULTI JOG
PHONES
SYSTEM TUNING/ TUNER
SETUP RETURN TONE STATION EDIT SPEAKERS
MULTI JOG
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-1016TXV
MULTI CH VIDEO SIGNAL SB ch SOUND
CD CD-R / TAPE / MD FM/AM XM IN SELECT SELECT PROCESSING RETRIEVER
MASTER
VOLUME
S-VIDEO VIDEO/GAME INPUT MCACC
VIDEO L AUDIO R DIGITAL IN SETUP MIC
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 48 for more on setting up the receiver.
Important
• The additional SR+ features do not work when the
XM Radio function is selected.
DVD TV
CD CD-R
SLEEP
SR+
DIALOG E
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you've connected the receiver in The Input
Assign menu on page 46.
2 To switch SR+ mode on/off, press RECEIVER , then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
• The automatic volume muting feature is enabled
separately; see SR+ Setup for Pioneer plasma displays
on page 48.
DVR 2
DVR1 TV CTRL
XM RADIO
TUNER RECEIVER
SB ch ANALOG
ATT
MIDNIGHT/
DIMMER
LOUDNESS
PHASE S.RETRIEVER
08
45
En