Page 1
MONOPRICE El Niño 1000 Personal Blender/Mixer P/N 18718 User's Manual...
Page 2
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ...
Page 3
Do not overload the blending/drinking cup. If the motor stalls, cease operation and let it cool for at least 15 minutes, then remove some of the ingredients and try again. This blender will not mash potatoes, whip egg whites or substitute dairy toppings, mix stiff dough, or grind raw meat.
Page 4
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-...
Page 5
PRODUCT OVERVIEW 1. Motor base 5. Drinking lid 2. Control buttons 6. Storage lid 3. 16.9 fl. oz. blending/drinking cup 7. Blade base 4. 20 fl. oz. blending/drinking cup 8. Power cord...
Page 6
ASSEMBLY 1. Ensure that the blender is unplugged from its power source. 2. Put food and/or liquid into the blending/drinking cup. Food should be cut into 3/4" to 1" sizes. Do not fill the cup beyond the Max line. 3. Screw the blade base onto the blending/drinking cup. 4.
Page 7
OPERATING MODES Never operate the blender with an empty blending/drinking cup. The blender will stop blending and return to Standby mode after 1 minute of operation. Do not operate it again until after 5 minutes have elapsed. Standby Mode When the blender is plugged into a power source and the cup/blade base assembly has been properly installed, the LED inside the ON/OFF button will blink red to indicate that the blender is in Standby mode.
Page 8
Pulse Mode Press the PULSE button to begin blending in Pulse mode. In Pulse mode the blender operates as long as the PULSE button is being pressed and stops when the PULSE button is released. The blender can be operated in Pulse mode for a maximum of 1 minute. Do not operate the blender again until after 5 minutes have elapsed.
Need help?
Do you have a question about the El Niño 1000 and is the answer not in the manual?
Questions and answers