NUM PULSES
When enabled, receiving Midi Program Change messages will recall the corresponding setlist preset, not actual preset.
LATCH TIME
Choose how long (in milliseconds) each Auxiliary Tap Output stays engaged. Some pedals may require the signal to
be engaged longer or shorter to be received accurately. Use the Preset Knob to select the output. Use the Tempo
Knob to set the value.
POLARITY
Choose what polarity each output is. "Normally Open", "Normally Closed", or "TRS" (for most Strymon pedals),
"DIG" (for the Strymon DIG) Use the Preset Knob to select the output. Use the Tempo Knob to set the value.
LED PULSES
Choose how many times the LED will flash when something changes. This can be infinite.
GLBL TEMPO
When enabled, tempos will not be recalled when recalling a preset. Tempo is changed globally via tapping, Midi, or the
metronome input. All other preset data will still be recalled.
AUDIO INPUT
RECEIVE - Choose whether the Audio/Metronome input is enabled or not. Any audio signal will be ignored if this is
disable.
THRESHOLD - Choose the threshold at which to listen to Audio/Metronome. Example: If set to 3, the Quartz will only
change if the BPM is at least 3 BPM different to the current BPM. Use the Tempo Knob to set the value.
FOOT FUNC
ONBOARD > TAPPING - Choose what the Quartz's footswitch does when tapped.
> HOLDING - Choose what the Quartz's footswitch does when held for 1 second.
JACK 1, 2 & 3 TIP > TAPPING - Choose what the switch connected to each Jack's Tip does when tapped.
> HOLDING - Choose what the switch connected to each Jack's Tip does, when held
JACK 1, 2 & 3 RING > TAPPING - Choose what the switch connected to each Jack's Ring does when tapped.
> HOLDING - Choose what the switch connected to each Jack's Ring does when held
DISPLAY
Choose whether the Tempo is displayed in milliseconds or BPM.
DIA MOD
Enable/Disable the extra switching device on output 4, to be used with Diamond pedals. Keep this option disabled
unless you have a modded Quartz to support Diamond pedals.
down for 1 second.
down for 1 second.
Page 11
Need help?
Do you have a question about the Quartz Timer V2 and is the answer not in the manual?