First time Auto
Tuning
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
●
These steps are not necessary if the setup has been
completed by your local dealer.
●
Please complete connections (p. 13 - 17) and
settings (if necessary) of the connected equipment
before starting Auto Tuning. For information about
the settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
●
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home
■
How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
When the speaker is not connected to the TV, [Speaker
Connection Check] screen appears
●
Ensure the speaker connection is completed (p. 11)
and press the OK button.
●
When the speaker is not connected to the TV, turn
the TV off with the remote control and connect the
speaker at first. (p. 11)
Select [Home]
Select [Home] for use in a home viewing environment.
●
[Shop] is for shop display.
●
Set up the network connection
Select your country
Select your area
Tick the TV signal mode to tune, and then select
[Start Auto Tuning]
If tuning has failed check the Satellite cable, RF cable,
and the network connection, and then follow the on-
screen instructions.
●
●
●
●
●
Shop
To change the viewing environment later on, the set
will need to have all settings initialised by accessing
Shipping Condition.
Australia
: tune (search for the available channels)
: skip tuning
Auto Tuning is now complete and the
TV is ready for viewing.
Note
The TV goes into Standby mode when no operation
is performed for 4 hours if [Auto Standby] in the Timer
Menu is set to [On].
The TV goes into Standby mode when no signal is
received and no operation is performed for
10 minutes if [No signal Power off] in the Timer Menu
is set to [On].
To retune all channels
[Auto Tuning] in [Tuning Menu] (Setup Menu)
To add the available TV signal mode later
[Add TV Signal] in [Tuning Menu] (Setup Menu)
To initialise all settings
[Shipping Condition] in [System Menu] (Setup
Menu)
21
English