Network Setting - C Spire R772 User Manual

Enable Auto Connection
1. Select or clear the Enable Auto Connection check box.
2. Click Save.
Note: If you click Connect, Enable Auto Connection will be cleared automatically regardless
of whether Enable Auto Connection was selected before rebooting the device.
Change Your Connection Options
1. Select a connection option.
2. Click Save.
Note: If the device is not activated, the options will be unavailable (grayed out).

Network Setting

When you open the Network Setting menu, the following choices are available:
LAN Setting
● IP Address – IP Address that your PC is assigned by your device
● Subnet Mask – Subnet Mask that your PC is assigned by your device
25