Using The R772, Portable Wi-Fi Hotspot; Connecting To The Device - C Spire R772 User Manual

Using the R772, Portable Wi-Fi Hotspot

This section contains information on your device's connection and LCD user interface.

Connecting to the Device

Opening the Web Browser Interface
Device User Interface
Device UI Operation
Connecting to the Device
Now, you're ready to connect your computer or other Wi-Fi capable device to the R772 using
Wi-Fi connection.
1. Turn your computer and the R772
Power-on animation appears on the R772 LCD window. After playing power-on animation,
the R772 will search for available 4G LTE or 3G services. R772 LCD window will display
messages and service icons when it's connected to 4G or 3G network. Then, R772
broadcasts Wi-Fi network signal.
2. Use the Wi-Fi manager (Windows) or the AirPort menu bar (Mac OS) to connect to the Wi-Fi
signal from the R772.
Note: The way to connect Wi-Fi network vary depending on your computer and its operation
system. The typical way to do it for Windows is to select View Available Wireless Network in the
notification area. For Mac OS, the AirPort icon in the menu bar is used. If you have any problem
in setting up Wi-Fi connection on your computer, refer to the computer help system.
3. Select the Wi-Fi signal named "C Spire Portable WI-Fi Hotspot XXXX" where XXXX is the
last four digit of Wi-Fi MAC ID found on the device sticker.
4. Once connected to the Wi-Fi network from the R772, you can open the internet browser in
your computer and start surfing.
Important: There is no password pre-configured. Upon your first connection to the WI-Fi
network from the R772, immediately change the Wi-Fi security settings to secure your
connection security.
1. Type http://192.168.10.1 or http://cspire-admin into the address window and press Enter.
2. See "the Wi-Fi menu" on the page 16 of this manual.
8