Connections - Freedom Scientific Focus Blue 5th Generation User Manual

Connections

Activating this menu item displays a list of active connections. To indicate the
active connection currently in use, dots 7 and 8 are displayed under the
connection name.
Use the Rocker bars to navigate to the connection you want to use and press
DOT 8 or the Right Selector button to switch to it. For example, if the Focus is
connected over USB to your primary computer running JAWS and you receive
a text message on your iPhone that you want to read and respond to using the
braille display, you can switch to the Bluetooth connection for your phone,
respond to any messages, and then switch back to USB to resume braille
access to your computer.
Note: Android and iOS devices must first be locked before the display is
switched from USB to Bluetooth connectivity. Once the display is
switched to Bluetooth, unlock your mobile device so that it will find the
display and begin using it as usual. Once the connection is established,
you can switch between connections without having to first lock and
unlock the device.
To delete a specific connection, use the Rocker bars to navigate to it in the list
and press Left Shift+D (DOTS 1-4-5) or Left Shift+Right Selector. When
prompted, press Y (DOTS 1-3-4-5-6) or the Right Selector button to delete the
connection, or N (DOTS 1-3-4-5) or the Left Selector button to cancel the
deletion.
To delete all connections in the list, use the Rocker bars to navigate to "Clear
connections list" and press DOT 8 or the Right Selector button. When
prompted, press Y (DOTS 1-3-4-5-6) or the Right Selector button to delete all
connections, or N (DOTS 1-3-4-5) or the Left Selector button to cancel the
deletion.
Note: If you delete the pairing for an active connection that is still in use, after
confirming the deletion, you must turn the display off and back on to
finish removing the connection.
19