Placement Of Status Cells; Variable Braille Dot Firmness - Freedom Scientific Focus Blue 5th Generation User Manual

In addition, the following commands are available even when Braille Study
Mode is disabled:
• Press the Left or Right NAV Mode button and a Cursor Router to
make JAWS announce the braille character in the display cell, or
• Press the Left or Right Selector button and a Cursor Router to
make JAWS announce and spell the braille word.
This is useful when you need a quick reminder, but you do not want to go
through the process of turning on Braille Study Mode as previously described.
Note: JAWS returns to normal operation after announcing the braille character
or word.

Placement of Status Cells

You can specify if the informational Status Cells are to be located on the left or
right end of the display, or choose to not display them at all. The status cells
are located at the left end of the display by default.
To configure the placement of the status cells, do the following:
1. Press INSERT+F2, and select Settings Center.
2. To apply changes to all applications, press CTRL+SHIFT+D to load
the JAWS default settings. To apply changes to a specific application,
select it from the Application combo box.
3. In the Search edit box, type "status cells" without the quotes.
4. Press DOWN ARROW to move to "Placement of status cells" in the
filtered search results in the tree view.
5. Use the SPACEBAR to choose an option and then choose OK to
close Settings Center.

Variable Braille Dot Firmness

Specify the firmness of the braille dots on the Focus display. There are five
levels of firmness. Adjust the display to the level of firmness most suited to the
sensitivity of your fingers.
13