Your Phone At A Glance; Set Up Your Phone; Activate Your Phone - LG LS991 User Manual

Get Started
This section gives you all the information you need to set up your phone and Sprint service for the first
time.

Your Phone at a Glance

The following illustration outlines your phone‗s primary external features and buttons.

Set Up Your Phone

You must first install and charge the battery to begin setting up your phone.
1. Install the battery.

Insert your fingernail into the slot located on the lower left of the back cover and lift the cover
up gently.

Insert the battery, contacts end first, and gently press the battery into place.

Replace the back cover, making sure all the tabs are secure and there are no gaps around
the cover.
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Plug the USB connector into the charger/accessory port at the bottom of your phone.

Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to three
hours.
Note: Your phone's battery should have enough charge for the phone to turn on and find a signal, run the
setup application, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press and hold the Power/Lock Button

If your phone is activated, it will turn on, search for Sprint service, and begin the setup
process.

If your phone is not yet activated, see

Activate Your Phone

Follow the instructions below to activate your phone if it has not already been activated. Depending on
your account or how and where you purchased your phone, it may be ready to use or you may need to
activate it on your Sprint account.
●
If you purchased your phone at a Sprint Store, it is probably activated and ready to use.
Get Started
to turn the phone on.
Activate Your Phone for more information.
1