Page 3
MS1000 USB Remote Keypad Operator manual 901-80027001/1.1...
Page 4
GM,GC Aug 12, 2015 The information contained in this document is subject to change without prior notice. Kongsberg Mesotech Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this document.
USB Remote Keypad / Operator Manual Installation The remote Keypad is a plug-and-play device. It requires connection to one of the host PC's USB ports. The remote Keypad can be used as a handheld or desktop device. It can also be attached to a flat surface using the four #8-32 mounting holes on the back. The following diagram shows remote Keypad back-view with dimensions of mounting holes: 901-80027001/1.1...
the right-button emulates the mouse right-button action. Note! You can use the joystick to operate Windows applications. The labelled keys activate the corresponding functionality in the operation of the MS1000 software. Note! These keys are designed only for operating the MS1000 software, and therefore can not be used for other applications.
Page 10
USB Remote Keypad / Operator Manual Press: Adjust Scan Speed for the selected head Adjust Gain for the selected head Adjust Sector Heading for the selected head Adjust Sector Width for the selected head Change image colour Palette for the selected head Start Recording sonar data for all heads connected to the system Start Playback of a recorded sonar data file - END OF DOCUMENT -...
Need help?
Do you have a question about the MS1000 and is the answer not in the manual?
Questions and answers