Operation; Assembly - Unit UCJ-419 Instruction Manual

The Slow Juicer virtually assembled straight out of the box. We suggest taking it apart and washing the removable
parts in warm water with non-abrasive liquid detergent before the rst use. Rinse thoroughly with warm water
and allow to air dry. This will eliminate any traces of dust or residue from manufacturing or shipping. Never
submerge the Slow Juicer motor base in water or any other liquid.
1. Assemble the bowl to the base. (Figure 1)
a. Make sure the bowl ts all the way into the shell of the base.
b. Align the arrow on the bowl with the arrow on the base, twist clockwise slightly to lock. (Note: If the bowl
not completely locked onto the base, the machine will not start.)
2. Assemble the Strainer and Rotating Basket to the bowl. (Figure 2)
a. Make sure the deep pit on the strainer basket lines up with the red dot on the bowl.
3. Place the Auger in the center of the bowl. (Figure 3)
a. Twist the Auger clockwise until it drops into place.
1
4 | Slow juicer /

Operation

Assembly

2
3