Contents The Slow Juicing Di erence General Safety Regulations Slow Juicer Components Operation Assembly Using the Slow Juicer Slow Juicing Tips Cleaning For Tough Stains Other Cleaning Tips...
• To protect against electrical shock, do not place cord, plug, or base unit in water or other liquids. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
Operation The Slow Juicer virtually assembled straight out of the box. We suggest taking it apart and washing the removable parts in warm water with non-abrasive liquid detergent before the rst use. Rinse thoroughly with warm water and allow to air dry. This will eliminate any traces of dust or residue from manufacturing or shipping. Never submerge the Slow Juicer motor base in water or any other liquid.
4. Place the Food Chute onto the bowl. a. Make sure the tilt-out triangle of the Food Chute is aligned with the unlocked sign on the bowl. (Figure 4) b. Turn the Food Chute clockwise until the lid clicks into the locked position. (The arrow on the Food Chute will line up with word CLOSED on the motor base.
5. When placing any food in the Slow Juicer, the Auger will automatically pull in the food, and begin juicing imme- diately. DO NOT push, force, or overstu the unit. The Pusher provided with the Slow Juicer is only to use when food obstructs the inside of the Food Chute.
Do not rinse the Slow Juicer base or submerge the base in water. c. Dry all Slow Juicer attachments before reusing. 7. Hand washing recommended for all components of the upper unit. Please do not place any of the Slow Juicer parts in the dishwasher.
Page 9
The head o ce of the manufacturer : «UNIT Handelsgesellschaft G.m.b.H.» 131, Gersthofer Str., A-1180, Vienna, Austria Exported by: «UNIT Electronics (H. K.) Limited» 3905 Two Exchange Square, 8 Connaught Place, Central, Hong Kong Made in People’s Republic of China (P.R.C.) This appliance is to be stored and used under the following conditions: temperature –...