Limitation Of Liability; Before Use - Zte S202 User Manual

The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is
1.490W/kg and when worn on the body, as described in this user guide, is 0.684 W/kg (Body-worn
measurements differ among phone models, depending upon available enhancements and FCC
requirements.)
While there may be differences between the SAR levels of various phones and at various positions, they
all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on
FCC ID: Q78-GS202.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use
with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the
body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If
you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a
minimum of 1.5 cm from your body when the phone is switched on.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with using this product, whether or not ZTE had been
advised, knew or should have known the possibility of such damages. The user should refer to the
enclosed warranty card for full warranty and service information.
Notes:
The pictures and icons shown in the manual are just schematic drawings for function demonstration. If
they are inconsistent with your handset, please take your handset as the standard. If the inconsistency exits
in the manual because of the handset function updating, please refer to the follow-up public information
from ZTE CORPORATION.

Before use

Put in / take out battery
Put in battery
1. Remove the battery cover.
2. Insert the battery carefully with the contacts located against the gold springs. The battery will only fit
one way.
3. Put on battery cover. Make sure that cover is completely matched and the cover matching sound could
be heard.
4 Confidential and Proprietary Information of ZTE CORPORATION
S202 GSM Mobile Phone User Guide