Pioneer SC-LX502 Basic Manual page 24

> Before Start > Part Names
(North American
models)
b
a AM loop antenna, b Indoor FM antenna, c Ethernet Cable, d Power Cord
24
> Install
a
c
(European,
Australian and
Asian models)
b
> Initial Setup > Playback
d
8. Connect Other Cables
Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the indoor FM antenna to a wall.
Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy network features such as
internet radio by connecting the unit to the network. If you
connect by wired LAN, connect with an Ethernet cable to the
NETWORK port as shown in the illustration. To connect by Wi-
Fi, then after selecting "Wireless" in "3. Network Connection"
(P26) in Initial Setup, select the desired setting method and
follow the onscreen instructions to configure the connection.
Power Cord Hookup
This unit includes a removable power cord. Connect the
power cord to the power outlet after completing all other
connections. Connect the power cord to AC IN of the unit
and then connect to the outlet. Always disconnect the outlet
side first when disconnecting the power cord.
You can find the voltage selector switch on the rear panel of
multi-voltage models. Please set it to the correct voltage for
your country or region.
Before changing the voltage, disconnect the power cord. Use a
medium size screwdriver to change the voltage switch.