Setting Radio Presets; Using The Fm Radio - capello Ci302 User Manual

using the FM radio

Turn on the unit by pressing the STANDBY button.
u
If you are not already in TUNER mode, press the MODE button and select Tuner mode.
v
If the FM station you have selected is broadcasting in stereo, "STEREO" will appear in the display. To choose
w
between stereo and mono palyback, press the STEREO / MONO button on the remote.
Repeatedly press the SKIP UP + button or the SKIP DOWN – button to manually advance the frequency on the
x
display up or down until the desired frequency appears.
For AUTO TUNING, press and hold the SKIP UP + button or the SKIP DOWN – button until the frequency in the
y
display starts to scan and then release; the tuner will search and then stop on the next strong station signal it nds.
Repeat this step until the desired frequency appears on the display.
note: Unravel and extend the FM wire antenna for best reception.

setting radio presets

Follow the steps in the previous section to tune a station. Press the PROGRAM / CLOCK SET button; "MEM" will
u
appear in the display and "01" (if no presets have ever been set) will blink in the display.
Within ve seconds, press the PRESET + or PRESET – button to select a desired preset number (01-20).
v
w Press the PROGRAM / CLOCK SET button again to con rm the setting and the station will be saved into memory.
Repeat these steps for up to 20 presets, as desired.
x
For AUTO PRESETS, press and hold the PROGRAM / CLOCK SET button, "MEM" and "AUTO" will appear in the
y
display, the station will automatically be saved into memory (from Pr 01 to Pr 20).