Do you have a question about the Ci302 and is the answer not in the manual?
Questions and answers
Dan
April 5, 2025
The display is dark, so I can't see the station its set on or the time when I turn it off.
2 comments:
Mr. Anderson
April 5, 2025
The display on the Capello Ci302 may be dark because the unit is off and in standby mode, during which it only displays the clock time. To fix this, press the Power or STANDBY button to turn the unit on.
This answer is automatically generated
Dan
April 6, 2025
@Mr. Anderson the unit is on and I hear music from it, but the display is dark.
Rob Lemke
May 26, 2025
Each day at noon my Cabello radio/cd player automatically turns on and plays the radio for an hour. Then it turns off. It feels like it has been programmed to do this, but not by me. How can I remove this program?
1 comments:
Mr. Anderson
May 26, 2025
To remove (cancel) the automatic programming feature (TIMER) on the Capello Ci302, make sure the unit is in POWER OFF mode. Then press the TIMER button; "Timer" will disappear from the display, indicating the timer has been canceled.
This answer is automatically generated
Glenda Johanns
April 2, 2025
Power on doesn’t work
1 comments:
Mr. Anderson
April 2, 2025
The Capello Ci302 may not power on if the power is not turned on. Press the Power button to turn the unit on.
This answer is automatically generated
Abdul Farrakhan
January 23, 2025
Hi, how do I pair it with another speaker
1 comments:
Mr. Anderson
February 10, 2025
The Capello Ci302 has a PAIRING button. To pair it with another speaker, press the PAIRING button on the unit. Ensure the other speaker is in pairing mode and compatible with Bluetooth connections. Follow any additional pairing instructions specific to the other speaker.
This answer is automatically generated
Mark Hanna
June 3, 2025
How do you pair the blue tooth
Marty
May 17, 2025
We’re is the 9 volt battery go
Summary of Contents for capello Ci302
Page 1
Play-It-All cd home system Ci302 user guide...
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. (This Caution Marking with Rating Label is located at the bottom enclosure of the unit).
IMPORTANT SAFETY PRECAUTIONS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY PRECAUTIONS Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.
Page 5
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. Used wisely, your new Ci302 CD Home system will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetected until it is too late, we recommend you avoid prolonged exposure to excessive noise.
location of controls CD Compartment Left Speaker PLAY / PAUSE Button SKIP + Button PAIRING Button Display PRESET + Button FM Wire Antenna STOP Button VOLUME + Button MODE Button DC Jack VOLUME – Button PROGRAM / CLOCK SET Button AUX IN PRESET –...
Ci302 CD Home System, AC power adapter, wireless remote control and user guide. AC outlet power source Insert the AC plug into a wall outlet having 120V AC, 60Hz. AC adapter’s plug operation Refer to the location of controls diagram before operation.
inserting remote battery Remove the battery compartment, located on the bottom rear of the remote control, by sliding the compartment out. (You can also insert a penny or similar object into the groove on the compartment to help side it out. Install a CR2025 battery, paying attention to the polarity diagram in the compartment (positive side up).
using the FM radio Turn on the unit by pressing the STANDBY button. If you are not already in TUNER mode, press the MODE button and select Tuner mode. If the FM station you have selected is broadcasting in stereo, “STEREO” will appear in the display. To choose between stereo and mono palyback, press the STEREO / MONO button on the remote.
Page 11
Turn on the unit by pressing the STANDBY Button. Please the MODE button to set the unit to BT mode. One your Bluetooth enabled deivce, select “Ci302” from the available list and your Bluetooth audio device with connect to the Ci302.
using the CD player Turn on the unit by pressing the STANDBY Button. If you are not already in CD mode, press the MODE button and select CD mode. Press the “Press to Open” area on the CD lid to open the CD compartment. Gently press a CD onto the center spindle with the label side facing up and close the CD lid.
Page 13
playback from a specific CD track While in STOP mode, press the SKIP UP + button or the SKIP DOWN – button to select a speci c track for playback. When the desired track/ le is selected, press the PLAY / PAUSE button and playback will begin with the track/ le you selected.
CD memory programming (up to 20 tracks) Programming is the ability to preselect the order in which a series of tracks will be played. While in the STOP mode, press the PROGRAM / CLOCK SET button. “MEM”, the track number and “Pr01” (the program number) will appear in the display.
adjusting the volume, treble and bass Press the VOLUME UP ( + ) or VOLUME DOWN ( – ) on the remote or on the main unit to increase or decrease the volume. To MUTE THE MAIN VOLUME: Press the MUTE button on the remote; "MUTE" will appear in the display. Press this button again or either of the VOLUME UP ( + ) or VOLUME DOWN ( –...
setting the timer With the unit off, press and hold the TIMER button until the TIMER ON hour blinks in the display. Within a few seconds, press the SKIP UP + or SKIP DOWN – button to set the TIMER ON hour. Then press the TIMER button again to con rm.
caring for CDs • Treat the compact disc carefully. Handle the compact disc by the edges only and avoid allowing your ngers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. •...
specifications GENERAL: Power Source ..............................DC 9V 3A AC Power Supply ........................AC 100 - 240V ~ 50/60Hz Power Source (Remote Control)..................DC 3V, CR2025 Lithium battery Speaker.................................2 x 6 ohms Output Power ..............................5W x 2 Dimensions ........................340(W) x 193(D) x 145(H)mm Weight ..................................
troubleshooting If you experience a product issue with this unit, please check the chart below or visit our website for more troubleshooting solutions and FAQs. symptom cause solution No sound. Volume is set to minimum. Increase volume. FM Radio / Tuner: Power is not on.
Page 20
For further assistance, please visit our website: hellocapello.com or contact customer service at support@hellocapello.com or 1-855-896-1795 Life Lab International Ltd. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Life Lab International LTD. is under license. Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the Ci302 and is the answer not in the manual?
Questions and answers
The display is dark, so I can't see the station its set on or the time when I turn it off.
The display on the Capello Ci302 may be dark because the unit is off and in standby mode, during which it only displays the clock time. To fix this, press the Power or STANDBY button to turn the unit on.
This answer is automatically generated
@Mr. Anderson the unit is on and I hear music from it, but the display is dark.
Each day at noon my Cabello radio/cd player automatically turns on and plays the radio for an hour. Then it turns off. It feels like it has been programmed to do this, but not by me. How can I remove this program?
To remove (cancel) the automatic programming feature (TIMER) on the Capello Ci302, make sure the unit is in POWER OFF mode. Then press the TIMER button; "Timer" will disappear from the display, indicating the timer has been canceled.
This answer is automatically generated
Power on doesn’t work
The Capello Ci302 may not power on if the power is not turned on. Press the Power button to turn the unit on.
This answer is automatically generated
Hi, how do I pair it with another speaker
The Capello Ci302 has a PAIRING button. To pair it with another speaker, press the PAIRING button on the unit. Ensure the other speaker is in pairing mode and compatible with Bluetooth connections. Follow any additional pairing instructions specific to the other speaker.
This answer is automatically generated
How do you pair the blue tooth
We’re is the 9 volt battery go