Pioneer HTP-330 Operating Instructions Manual page 10

02 Connecting up
Receiver subwoofer
5
SYSTEM CONNECTOR
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
7
• Connect the other end to the color-coded speaker
terminals on the rear of the receiver subwoofer. Make
sure to insert completely.
The small lug at the wire-end of the speaker plug
should face up or down depending on whether it's
being plugged into one of the upper or lower speaker
terminals. Please make sure to connect correctly.
Upper terminal
• When connections are completed, adjust the cable
placements. If the speakers have been fixed with the
brackets, fix the cable to the groove in the brackets as
shown.
10
En
ANTENNA
FM UNBAL 75 AM LOOP ANTENNA
MCACC
AUDIO INPUT
SETUP MIC CONTROL IN
DIGITAL
SPEAKERS DVD/DVR1 DVD/DVR2 DIGITAL ANALOG
CONTROL
(COAXIAL) (OPTICAL) (OPTICAL)
OUT SUBWOOFER R SURROUND L
4
L
R
R L
CENTER FRONT
AC IN
To AC outlet
Lower terminal
Surround right
(Gray)
Center
Listening position
(Green)
Y-cable
Front right
(Red)
Speaker system
• Fasten the cables together with the spiral wrap.
Hold multiple cables together and place the wrap
over the cables from the end.
Wrap the spiral wrap with the cables in the center.
The spiral wrap may be cut at a desired length.
5 Connect the subwoofer cable.
• Just below the subwoofer speaker, to the left of
center, you should see the subwoofer connecting
cable. Plug this into the SUBWOOFER SPEAKER
terminal.
Caution
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not connect any speakers other than those
supplied to this system.
Surround left
(Blue)
Center
(Green)
Front left
(White)