Note:
See page 53 for information on frequencies for communicating with other business
radios.
Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code
combinations that filter out static, noise, and unwanted messages.
1. In Advanced Configuration mode, press S until k displays
and the code number blinks.
2. Press [or ] to select the code (see page 57).
3. Press and hold Push to Talk to exit, or press S to continue
programming.
Programming the Available Channels
If you need fewer channels, you can reduce the number of available channels.
1. In Advanced Configuration mode, press S until = displays and
the channel number blinks.
2. Press [or ] to select the number of channels you want available.
3. Press and hold Push to Talk to exit, or press S to continue
programming.
Note:
The radio retains settings for channels made unavailable.
32