Topfield TF4000PVR User Manual page 36

A. Satellite Name
Press the button to display the Satellite List Box. The Satellite name list is put in
alphabetical order. Select one of the preprogrammed satellites that correspond to the value
of the antenna. If the desired satellite name is not in the list, then select Others.
B. Search Mode
There are 4 search modes, Auto, Manual, Advanced and SMATV. The Auto
mode enables to search using the information the PVR has. On the other hand, there
will be a need to know in advance the frequencies and the symbol rates before using the
Manual mode. On the Advanced mode, enter the Audio PID, Video PID or the PCR
PID. The SMATV mode is used to special purposes on satellite master antenna TV
system.
C. Frequency
Enter the Transponder's Frequency by using the numeric buttons on your RCU.
D. Symbol Rate
Enter the Transponder's Symbol Rate by using the numeric buttons on your RCU.
E. Polarization
Choose the type of polarization, either the Horizontal or the Vertical.
F. Network Search
This Network Search item can be used if the Search mode is set to the
Manual or Auto mode. If the Network Search item is set to On and the NIT
(Network Information Table) is available, the Transponder's information can be found.
G. PID
Press button to enter Video,Audio and PCR PID's.
1) Video PID
Insert the Video PID by using the numeric buttons on your RCU.
2) Audio PID
Insert the Audio PID by using the numeric buttons on your RCU.
36