Related Manuals for Plasson IGBT Dimmer
Summary of Contents for Plasson IGBT Dimmer
- Page 1 IGBT Dimmer - Controller User's Manual Feeding Drinking Climate Housing Global Presence - Local Commitment Feeding Drinking Climate Housing...
-
Page 2: Product Features
Product Features Main Features of Plasson LED Dimmer are as follows: ● ● Fully integrated digital control No audible noise ● system Protection ● Input Surge protection: ● Power Supply System: Automated Lightning surge protection Voltage Detection and Switching Overvoltage protection: ●... -
Page 3: Mounting Instructions
Feeding Drinking Climate Housin Mounting Instructions Installing the wall plate to the wall Step 1: Using a level, set the wall Step 4: Align the top hole of the wall mount against the wall and mark the plate to the screw in the wall and lower screw holes on the wall. - Page 4 Attaching the Dimmer Attachment Plate (which is already attached to the dimmer) to the Wall Mount Use a screwdriver to tighten the screws from the top of the attachment plate into the wall mount which is hung on the wall. wall Push or pull from the top or bottom of the display to...
-
Page 5: Connection Method
These bladders will accept up to a Romex Fig. 1: The Plasson Dimmer-Controller 12-3 cable. Each bladder accepts a Fig. 1 The LIFELAMP Dimmer-Controller Romex cable for main power (right... - Page 6 Note: Now it is time to connect the wires. Remember that the center Romex/ wire connects to Light Line 2 (shown in Figure 3c. on right, The right Romex/wire connects to power and the left Romex/ wire connects to Light Line 1. It is critical that you connect the positive and neutral wires to the same terminal connections for the AC in Zone 1 and Zone 2.
- Page 7 Feeding Drinking Climate Housin Fig 4: Full installation wiring 0-10 vsc control Zone 2 for Plasson Dimmer-Controller Power In 110-240 Volts 0-10 vsc control Zone 1 Negative Positive Cannot have common Plasson Neutral between Dimmer Light Lines and Dimmer/Controller Controller...
-
Page 8: Programming Methods
Slave Mode, Master Mode. press the "UP/DOWN" key, the lighting ● Manual Mode intensity level of Zone 1 "xxx%" will In Manual Mode, the lighting intensity increase or decrease accordingly. of the Plasson LED Bulbs is controlled manually. | Dimmer User Manual... - Page 9 In this state, if you press the In Master Mode, the lighting intensity "UP/DOWN" key, the lighting intensity of the Plasson Bulbs is controlled by the level of on board program. The main screen of Zone 2 "yyy%" will increase or decrease Master Mode displays Figure 9.
- Page 10 ● You can select "EXIT" key to go to the Program Time ● main display screen (Manual/Slave/ You can set the present date and time. Master). The 12 Hour time clock comes up to You can select "ENTER" key in main view along with date.
- Page 11 Feeding Drinking Climate Housin The user can scroll through these and then hit enter. This will save the selections using the navigation "UP" same Lighting Program from the and "DOWN" buttons. Once you get previous day and move the Program to your desired "Zone x"...
- Page 12 Step1. When you hit Enter on the to move from one number field to "Program Day: xxx" line using the "UP/ the next and the "UP" and "DOWN" DOWN" keys as described above you navigation buttons to change the will come to a menu to program the actual values.
- Page 13 Feeding Drinking Climate Housin This is where the user will select which is being programmed for a given the amount of time for the lights to program day is set with an END TIME transition from the light intensity level of 11:59 PM then the interface moves of the previous period to the light to the NEXT PROGRAM DAY interface...
- Page 14 Overcurrent Protection If the load current exceeds the If an overvoltage fault has occurred, the overcurrent limit (9A in 110V Plasson Dimmer-Controller will cut off system, 5A in 220V system), then the output power. If the overvoltage the overcurrent error state is displayed...
-
Page 15: Product Number
You can select the "ENTER" key in main 16:54 display screen (Manual/Slave/Master) to go to the product information screen. 24/01/2014 Every Plasson Dimmer-Controller has a specific serial number which is listed in this interface. Fig. 25: Error history screen LIFELAMP V1.0... - Page 16 Global Presence – Local Commitment Maagan Michael, D.N. Menashe, 3780500, Israel Tel: +972-73-2413001, Fax: +972-73-2333711 info@plassonlivestock.com | www.plassonlivestock.com Feeding Drinking Climate Housing...
Need help?
Do you have a question about the IGBT Dimmer and is the answer not in the manual?
Questions and answers