Using Other Types Of Video Output - Pioneer DVR-510H Operating Instructions Manual

Connecting up
02

Using other types of video output

This recorder has standard (composite), S-video and component video outputs. The main difference between them is
the quality of the picture. S-video delivers a better picture than composite video, while component video gives better
picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using
the best connection type available.
1 Connecting using an S-video output
S-video carries the picture as separate color and
luminance (brightness) signals.
There are two S-video outputs for connection to TVs,
monitors, VCRs or other equipment.
• Use an S-video cable (not supplied) to connect an
S-VIDEO OUTPUT (1 or 2) to an S-video input on your
TV, monitor (or other equipment).
14
En
TV
1
INPUT 1/
AUTO START
OUTPUT 1
IN REC
R L R L
OUT
AUDIO VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
VHF/UHF INPUT 3 OUTPUT 2
COMPONENT
INPUT
S-VIDEO
2
INPUT
Y
DIGITAL CONTROL
OUT
P AC IN
B
P
R
OPTICAL IN
COMPONENT
VIDEO OUT
2 Connecting using the component video output
Component video carries the picture as two separate
color signals, plus a luminance (brightness) signal.
See also Component Video Out on page 92 for how to set
up the component video output for use with a progressive
scan-compatible TV.
• Use a component video cable (not supplied) to
connect the COMPONENT VIDEO OUT jacks to a
component video input on your TV, monitor (or
other equipment).