Usb Charging Port; Aux In Connection - capello Ci320 User Manual

flash.
- If asked for a password, enter "0000".
Reconnecting your Bluetooth devices
Once your Bluetooth device has been paired with Ci320, it is simple to reconnect them.
1. Make sure that Ci320 is powered on and within range.
2. Select "Ci320" from the list on your Bluetooth device.
3. The amber LED of Bluetooth indicator will change from flashing to solid, indicating
that your Bluetooth device is reconnected to Ci320.
Notes: For the best audio performance, turn the volume on your Bluetooth source
device all the way up. Ci320 can only play audio from one source at a time. If Ci320 is
connected to Line-In source, the Bluetooth will not function. Simply unplug the 3.5mm
Line-In audio cable and press the SOURCE or BLUETOOTH PAIR button to switch to
Bluetooth.

USB charging port

The Ci320 features one (1) USB port located on the rear of the unit (see "location of
controls"). The USB port support powering and charging most devices including
iPhones, iPads, iPods, E-readers, digital cameras and more. (USB cable sold
separately).
Aux-in connection
You can also play audio from other Line-In digital sources using a standard 3.5mm Line
In audio cable (sold separately).
1. Press the POWER ON/OFF button to turn on Ci320.
2. Insert one end of the 3.5mm audio cable into the Line-In jack on the rear of Ci320
and the other end into the Line-Out or headphone jack of your external audio device
(e.g. iPad, mobile phone, MP3 player, digital media player, etc.)
3. Repeatedly press the SOURCE button to switch the input source to AUX IN mode.
The amber LED of AUX IN indicator will light up.
4. Select the music you wish to listen to on your external audio device then press play
and sound will be projected through Ci320 speakers.