Advertisement
S70
Nevo
provides fully-customizable control of all of your home theater,
home automation and digital media content. Its touch-sensitive screen is
software-based, so your installer/integrator can include just those controls
you actually use.
Before You Use Nevo
Please ensure your Nevo
S70
Nevo
Universal
Controller
To charge your Nevo
1. Connect the power adapter to the
charging cradle and plug the adapter
into a wall outlet.
2. Plug in the battery, power on (On is to
the left), and dock Nevo
charging the battery. If it has not already been charged, it will take 3-4
hours to fully charge the battery the first time.
Recharging Nevo
S70
Nevo
includes a Lithium-ion rechargeable battery. Nevo
displays a warning message when the battery is running low. You should dock
S70
Nevo
at this time to charge the battery.
You can dismiss the warning message by clicking OK; if you do so and the
battery power becomes critically low, Nevo
critical low battery warning message. You cannot dismiss this message and
should dock Nevo
S70
To dock Nevo
is correctly docked, the blue light will appear on the cradle.
About Battery Life
As with all battery-operated devices, battery life will vary depending on
use. It is a good practice to keep Nevo
are not using it.
S70
S70
is fully charged before use.
S70
:
S70
to begin
S70
S70
immediately.
, simply set the controller in the charging cradle. When it
S70
will beep and display a
S70
in its charging cradle when you
Charging Cradle
AC Power
Adapter; varies
by country
S70
beeps and
Advertisement
