About Hdmi - Pioneer Elite DV-46AV Operating Instructions Manual

Connecting up
Note
• This unit has been designed to be
compliant with HDMI (High Definition
Multimedia Interface). Depending on the
component you have connected, using a
DVI connection may result in unreliable
signal transfers.
• When you change the component
connected to the HDMI output, you will
also need to change the HDMI settings to
match the new component (see HDMI Out
on page 40, HDMI Resolution on page 41
and HDMI Color on page 41 to do this).
However, the settings for each component
are then stored in memory (for up to 2
components).
• The HDMI connection is compatible with 2
channel linear PCM signals (44.1 kHz to
192 kHz, 16 bit/20 bit/24 bit), and Dolby
Digital, DTS, MPEG audio bitstream, and
multi channel linear PCM signals, (5.1
channel signals up to 96 kHz, 16 bit/20 bit/
24 bit).
• It is not possible to output SACD source
from the HDMI connection of this player.

About HDMI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital
Content Protection (HDCP) as well as Digital
Visual Interface (DVI) in one specification.
HDCP is used to protect digital content
transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Resetting the output resolution to the
default setting with HDMI connection
Switch the player to standby then, using the
front panel controls, press
while pressing to switch the player back to
576/480P.
STANDBY/ON
You can also use the HDMI RESOLUTION
button on the remote control to switch the
player back to 480P.
STANDBY/ON
HDMI
RESOLUTION
02
17
En