Section
03
Operating this unit
Setting up the DVD player
Introduction of DVD setup
adjustments
You can use this menu to change audio, subti-
tle, parental lock and other DVD settings. This
menu can be operated only by using the re-
mote control.
! To perform this function, set the remote
control to DVD mode.
1 DVD setup menu display
Shows the DVD setup menu names.
1
Press g.
2
Press MENU when the disc is stopped.
The DVD setup menu is displayed.
3
Move the joystick up or down to dis-
play the DVD setup function names.
Move the joystick up or down to switch the fol-
lowing DVD setup functions:
S.TTL LANG (subtitle language settings)—
AUDIO LANG (audio language settings)—
MENU LANG (menu language settings)—
ASSIST (assist subtitle)—ANGLE (angle icon)
—TV ASPECT (TV aspect)—PARENTAL (paren-
tal lock)—DIVX VOD (DivX VOD)—
DIVX S.TTL (DivX subtitle)—DIGI OUT (digital
output setting)
Note
If you press MENU during display of a DVD setup
menu, the DVD setup menu is canceled and the
unit returns to the previous display.
46
En
Setting the subtitle language
You can set a desired subtitle language. If the
selected subtitle language is recorded on the
DVD, subtitles are displayed in that language.
1
Move the joystick up or down to select
S.TTL LANG.
2
Click the joystick.
A subtitle language menu is displayed.
3
Move the joystick left or right to select
the desired language.
4
Click the joystick.
A subtitle language is set.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
displayed.
! You can also switch the subtitle language dur-
ing playback with SUBTITLE. (Refer to Chan-
ging the subtitle language during playback
(Multi-subtitle) on page 22.)
! Even if you use SUBTITLE to switch the subti-
tle language, this does not affect the settings
here.
! Pressing RETURN takes you back to the pre-
vious display.
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
chart for DVD on page 90, use the number but-
tons to input the four digit code of the desired
language, and then move the joystick right.
Note
Pressing CLEAR cancels the input numbers.