Pioneer DV-585K-s Operating Instructions Manual page 22

Pioneer dv-585k-s
Table of Contents

Advertisement

04
Getting started
Note
• You can adjust the HIGH tone in a range of
five steps and the LOW tone in a range of
five steps.
• If the microphone level is too high, the
sound may distort. In this case, lower the
volume.
When "howling" occurs
If sound from the speakers is picked up by a
mic and output again through the speakers,
the result is a screeching sound known as
"howling".
To eliminate howling:
• Point the mic away from the speakers.
• Move the mic away from the speakers.
• Turn VOLUME counterclockwise to lower
the volume level.
• Turn ECHO counterclockwise to lower the
echo effect.
Note
• Reduce the volume when plugging in the
microphone to prevent feedback.
FAQ
• After I load a DVD disc, it ejects
automatically after a few seconds!
Most likely, the disc is the wrong region for
your player. The region number should be
printed on the disc; check it against the
region number of the player (which you can
find on the rear panel). See also DVD-Video
regions on page 40.
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the disc
and look for signs of damage. See also
Taking care of your player and discs on
page 38.
22
En
• Why won't the disc I loaded play?
First check that you loaded the disc the
right way up (label side up), and that it's
clean and undamaged. See Taking care of
your player and discs on page 38 for
information on cleaning discs.
If a disc loaded correctly won't play, it's
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM. See
Disc / content format playback compatibility
on page 7 for more on disc compatibility.
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom of
the screen. This is not a malfunction.
• I have a standard (4:3) TV and set the player
to show widescreen DVDs in pan & scan
format, so why do I still get black bars top
and bottom with some discs?
Some discs override the display
preferences of the player, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letter box format.
This is not a malfunction.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents