Table of Contents
Advertisement
DigiSpeed-GX™
- Users Guide
Page 6
1.2
Overview
The DigiSpeed-GX™ Isolated Voltage Interface Unit is designed to allow devices such as
the Gecko G-100 motion controller and computer CNC programs such as Mach2,
TurboCNC and other CNC programs to control devices that require an isolated DC control
voltage.
DigiSpeed-GX™ is designed primarily for use with KB Electronics style DC motor
controllers, such as the KBIC-120. This is the type of controller found in the Sherline
Mills and Lathes. DigiSpeed-GX™ will work with other types of DC motor controllers
such as those found in the Asian imported mini lathes and Mills.
The DigiSpeed-GX™ is also well suited for use with VFDs such as the Automation Direct
GS2 series and other motor speed controllers which accept a 0-5Vdc, 0-10Vdc speed
control voltage.
The form factor of the DigiSpeed-GX™ PCB has been designed for easy installation. Due
to its compact size, it can also be installed unobtrusively into many of the existing speed
controller or CNC controller enclosures.
Copyright 2006 ©
Homann Designs
Revision 0.1
Advertisement
Table of Contents
