Marshall Electronics VS-102-HDSDI User Manual
  1. Manuals
  2. Brands
  3. Marshall Electronics Manuals
  4. Server
  5. VS-102-HDSDI
  6. User manual

Marshall Electronics VS-102-HDSDI User Manual

H.264 hd
Hide thumbs
Table of Contents

Advertisement

Quick Links

VS-102-HDSDI
H.264 HD VIDEO SERVER
User Manual
Ver. 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VS-102-HDSDI and is the answer not in the manual?

Questions and answers

Related Manuals for Marshall Electronics VS-102-HDSDI

Summary of Contents for Marshall Electronics VS-102-HDSDI

  • Page 1 VS-102-HDSDI H.264 HD VIDEO SERVER User Manual Ver. 1.0...
  • Page 2 We appreciate your purchasing VS-102-HDSDI. Before installing the product, please read the following with care.  Make sure to turn off the power before installing VS-102-HDSDI.  Do not install under the direct sunlight or in dusty areas.  Make sure to use the product within the temperature and humidity specified in the specification.

  • Page 3: Table Of Contents

    VS-102-HDSDI User Manual Table of Content Introduction ................................ 5 1. About This Manual ..........................5 2. Features ..............................5 3. Product and Accessories ........................7 4. Part Names and Functions ........................8 5. System Modes and Connections ......................10 Installation ................................ 13 1.
  • Page 4 VS-102-HDSDI User Manual Appendix ................................59 1. Appendix A: Sensor and Alarm Port ....................59 2. Appendix B: Serial Port ........................61 4/61 IP Server Instruction Manual...

  • Page 5: Introduction

    2. Features The VS-102-HDSDI is a video and audio transmission system that provides broadcast quality audio and video, based on IP network through LAN, ADSL/VDSL, and Wireless LAN. The VS-102-HDSDI can operate in an Encoder mode or a Decoder mode. The Encoder system compresses video data and transmits it.
  • Page 6 VS-102-HDSDI User Manual  Serial Data Two serial ports: RS-232, RS-422/485  Various PTZ camera protocols  Data pass-through mode: Serial data communication between Encoder - Decoder   Sensor and Alarm Connections to external sensor and alarm devices ...

  • Page 7: Product And Accessories

    VS-102-HDSDI User Manual 3. Product and Accessories User Manual Power adapter and Cable VS-102-HDSDI Screws Software CD Brackets 7/61 IP Server Instruction Manual...

  • Page 8: Part Names And Functions

    VS-102-HDSDI User Manual 4. Part Names and Functions  Front View ⑦ ⑥ ⑩ ⑨ ⑧ ① ② ③ ④ ⑤ Parts Function Display system status ① Audio Input Audio Input ② Audio Output Audio Output ③ HDMI Input HDMI Video Input ④...
  • Page 9 VS-102-HDSDI User Manual  Rear View ① ④ ② ③ ⑤ Part Function Power DC +12V power input ① RS-422/485 Serial port for PTZ control and etc ② RS-232 Serial port for PTZ control and etc ③ Composite In/ Output Composite Video Input / Output ④...

  • Page 10: System Modes And Connections

    VS-102-HDSDI User Manual 5. System Modes and Connections VS-102-HDSDI operates as one of two modes; Encoder, and Decoder. VS-102-HDSDI systems can be connected in either 1-to-1 fashion where one encoder is connected to one decoder or 1-to-many fashion where one encoder is connected to many decoders.
  • Page 11 VS-102-HDSDI User Manual 1:N Connection (Unidirectional Transmission).  Remote Center Site Decoder Encoder Decoder Decoder In this configuration, a site can be monitored from many remote center locations. Maximum connections would be limited by network bandwidth capacity. Functionally, the VMS (Central Monitoring System) software can replace the decoder.
  • Page 12 VS-102-HDSDI User Manual VMS (Video Management System)  site Remote Center Encoder Site Remote Center Encoder Decoder VMS (Video Management System) is a Windows based remote monitoring program to access multiple encoders for real-time monitoring or control of the encoders and connected cameras. Please refer to the VMS User Manual for more information on VMS.

  • Page 13: Installation

    Connect a camera to the Video Input port of the VS-102-HDSDI accordingly.  Decoder System Connect a monitor to the HDMI or COMPOSITE (HD-SDI) Output of VS-102-HDSDI accordingly. 2. Connecting Audio Audio is bi-directional in any configuration regardless of the system mode (Encoder or Decoder).

  • Page 14: Connecting Power

    VS-102-HDSDI User Manual 5. Connecting Power After confirming the power source, connect the power adaptor and connect the 12VDC connector to the system. The system will then boot up to an operating mode. 6. Check if it Works Once the power is supplied to the camera, it will start booting. The system will boot up to an operating mode after approximately 40-60 seconds.

  • Page 15: System Operation

    VS-102-HDSDI User Manual System Operation 1. LED Display  Description of LED System status can be monitored with LED display State Description Power off Power on Green blinking Operating normally System failure: Needs diagnostics Constant change of colors NTSC/PAL setting does not match...

  • Page 16: Remote Video Monitoring

    VS-102-HDSDI User Manual 2. Remote Video Monitoring There are two ways to view video when the connections are completed between a site and center system. In order for a proper operation, an IP address must be set accordingly. Please refer to the True Manager in Chapter 3 or Remote Setting in Chapter 4 for further details.
  • Page 17 This feature lets you select the video stream to be viewed: Primary or Secondary. VS-102-HDSDI is capable of dual streaming; primary streaming and secondary streaming. Video will be displayed according to the resolution set on video configuration. If dual streaming (“Use Dual Encode”...
  • Page 18  When the sensor on VD-102-HDSDI is working, the light turns red. Alarm Output  This feature operates the alarm device connected to VS-102-HDSDI. Screen Capture  This feature capture pictures and stores them as BMP or JPEG files. Audio Transfer ...

  • Page 19: Initialization Of Ip Address

    VS-102-HDSDI User Manual File record  Recording to an AVI file on Live view page is available. AVI files are generated in the specified folder or in specified file name on the PC where web browser is running. 1. Enter the drive and the folder name on the PC and enter the AVI file name to be used.

  • Page 20: Remote Configuration

    Remote Configuration Remote configuration of the server is available by web browser. Enter the IP address of the VS-102-HDSDI and then a live view screen appears as shown below. Press the Setup button in the screen to set the server.

  • Page 21: Encoder Configuration

    VS-102-HDSDI User Manual Encoder Configuration Encoder Configuration While most configuration items are common for Encoder and Decoder mode, there are items which are relevant to the specific system mode. The configuration items for Encoder mode are explained and then items specific only to Decoder mode are described, respectively.
  • Page 22 VS-102-HDSDI User Manual  General System Mode  This option lets you select the System Mode: Encoder or Decoder. System ID  Set the System ID. The set System ID is displayed with the video image in the web browser.
  • Page 23 VS-102-HDSDI User Manual Current Time  Current date & time: Enter a new date and time and press the "Set Current Time" button to update the date & time. Time Format  Changes the time format. Selectable time formats are as shown below.

  • Page 24: Video Configuration

    VS-102-HDSDI User Manual 2. Video Configuration 24/61 IP Server Instruction Manual...
  • Page 25 VS-102-HDSDI User Manual  Encode Input Format  Select ON to display video on the monitor that is connected to the composite or HD/SD-SDI or HDMI video port. Select an Input Format. There are 4 types of input ports: Composite, HD-SDI (Option), SD-SDI(Option), HDMI.
  • Page 26 VS-102-HDSDI User Manual Quality  Select video quality. Eight levels of quality are available. Quality mode (VBR encoding) adjusts the bit rate according to the image complexity, using higher bandwidth for increased activity in the video and lower bandwidth for decreased activity.
  • Page 27 VS-102-HDSDI User Manual  Dual Encode Use Dual Encode  1. Select the Off button on the Enable Preview to enable to use Dual Encode. 2. Select ON to enable to use Dual Encoding. The secondary video can be viewed on Live View window by selecting Secondary on Video selection.
  • Page 28 VS-102-HDSDI User Manual Sensitivity  This feature sets the condition to trigger an event for motion detection. The value determines the sensitivity of the motion detection within a block: the smaller, the more sensitive. Information Display  System ID and/or server time can be displayed over the video window in Internet Explorer. Each item can be turned on or off separately, and the position also can be configured.

  • Page 29: Audio Configuration

    VS-102-HDSI User Manual 3. Audio Configuration  Algorithm This feature lets you select an audio algorithm between G.711 and AAC.  Bit rate  Select the Bit rate between 64kbps and 128kbps when AAC is selected. The sampling rate is fixed to 32KHz when AAC is selected. Note that when a n y V S Camera or Encoder is connected to a decoder, the decoder‟s audio algorithm should be set identically to transmit audio properly.

  • Page 30: Network Configuration

    VS-102-HDSDI User Manual 4. Network Configuration 30/61 IP Server Instruction Manual...
  • Page 31 VS-102-HDSDI User Manual  Local IP mode  Two IP modes are supported. Depending on the selected mode, further configuration items are available as follows: IP Mode Selection Description Local IP Fixed IP address Local Gateway IP address Fixed IP...
  • Page 32 VS-102-HDSDI User Manual Domain Name System (DNS) is a database system that translates a computer's fully qualified domain name into an IP address. Networked computers use IP addresses to locate and connect to each other, but IP addresses can be difficult for people to remember.
  • Page 33  SNMP  VS-102-HDSDI can be used as an SNMP agent. It is compatible to both SNMPv1 and SNMPvec. Settings for using SNMP (Simple Network Management Protocol) are as follows: SNMP Listen Port: The port is for connecting external devices when the system operates as an SNMP client.
  • Page 34 VS-102-HDSDI User Manual  DDNS Select the DDNS (Dynamic DNS) server to use. One of two servers can be selected. True DNS: TrueDNS service is used in this mode. Systems can be registered on the website  for TrueDNS service: http://ns1.truecam.net. The system will get a domain name of xxx.truecam.net style.

  • Page 35: Serial Port Configuration

    VS-102-HDSDI User Manual 5. Serial Port Configuration 35/61 IP Server Instruction Manual...
  • Page 36 Direct Keyboard Control: Keyboard controller can be connected to VS-102-HDSDI directly to  the control zoom and focus.  Sensor Type There are two sensor input ports on the VS-102-HDSDI. Each of the sensor ports can be configured as follows: Function Operation...

  • Page 37: Event Configuration

    VS-102-HDSDI User Manual 6. Event Configuration 37/61 IP Server Instruction Manual...
  • Page 38 VS-102-HDSDI User Manual  Local & Remote Event Configuration The Event Configuration configures the actions for each event type. The Local section configures  the actions for events from the local (self) system, and the configuration activates local devices. Remote sections configure the actions for events from the remote (peer) system.
  • Page 39 VS-102-HDSDI User Manual  E-mail Notification Specifies the information to send to "Event Information", when E-mail is selected as an event action. Server Address: Enter an address of the mail (SMTP) server.  Port: Specify a port for SMTP operation (Port 25 is the default port in SMTP operation. If a ...

  • Page 40: Preset Configuration

    VS-102-HDSDI User Manual 7.Preset Configuration  Enter a name  Move PTZ Camera to the desirable view. Save  Press Set Button You can configure up to 15 preset positions. The Preset function is not available on some PTZ receivers.

  • Page 41: Recording Configuration

    VS-102-HDSDI User Manual 8.Recording Configuration 41/61 IP Server Instruction Manual...
  • Page 42 VS-102-HDSDI User Manual USB Device USB hard disk or memory stick can be used, and at least 1GB size is recommended. Either the EXT3 or FAT32 file system can be used. A disk with either the EXT3 or FAT32 file system can be read in a Linux PC.
  • Page 43 VS-102-HDSDI User Manual Refer to the chart for checking the status of disk. Disk status Description Disk error detected Error No disk Disk is not connected to the system. Searching Disk information Checking the status of disk. Refresh the page and wait until the status is changed.
  • Page 44 If the recording time is more than 10 minutes, a new file will be created even though the previous file size is smaller than selected Max File Size.  Event Type Three recording modes are supported in VS-102-HDSDI: Full-time, Event, Disconnect. For Event  recording, event types can be selected among several events. Selected event type is used for configuring the schedule table.
  • Page 45 VS-102-HDSDI User Manual Checking status of recording Recording status can be shown on the main view page.  Recording status can be also shown in True Manager. When data is being recorded, Record  column displays ON sign 45/61 IP Server Instruction Manual...
  • Page 46 VS-102-HDSDI User Manual Search and Playback  Recorded File  Recorded video and audio data can be saved as AVI format in the disk.  In general, one AVI file is created for an event when using event-based recording. However, it is possible that recorded data by a series of events happening continuously can be merged to a single AVI file depending on pre/post event time setting.
  • Page 47 VS-102-HDSDI User Manual  Playback When you select an AVI file a dialog box window will appear asking you to "Open" or "Save" the file   When you press the Save button the file will be stored on the PC.
  • Page 48 VS-102-HDSDI User Manual  Deletion  If you want to delete recorded files, select the files by checking the item in front of each file and press the Delete button.  It is possible to delete multiple files at once.
  • Page 49 Trouble Shooting  There may be damage to the file system if you turn off the power of VS-102-HDSDI or disconnect the USB memory stick or USB HDD while data is being written.  For FAT32, recording can‟t be done normally if the file system is damaged. If this happens, the disk or memory stick should be reformatted on the PC.

  • Page 50: User Configuration

    VS-102-HDSDI User Manual 9. User Configuration  User List A user can be registered and their privilege level can be specified.  Only and Administrative User can configure other users permissions and level of privilege access. A maximum of 16 users can be registered and each user can have one of four privileges:...
  • Page 51 VS-102-HDSDI User Manual Add User  Press the "Add" button to bring up the Add User page. The User ID and password need to be entered and privilege level needs to be selected. The User ID and password consist of an alphanumeric string of a maximum of 15 characters.
  • Page 52 VS-102-HDSDI User Manual Modify Privilege Level  Pressing Modify Privilege button after selecting a user shows a page for changing the privilege. It is not allowed to change the privilege level of admin user.  Login Policy Authentication Type ...

  • Page 53: Decoder Configuration

    VS-102-HDSDI User Manual Decoder Configuration Decoder Configuration Decoder Configuration is slightly different from Encoder Configuration. Different configurations for the encoder will be explained in the Decoder Configuration. 1. System Configuration By setting System Mode to Decoder in the System configuration, the system will reboot and start to work as a Decoder.

  • Page 54: Video Configuration

    VS-102-HDSDI User Manual 2. Video Configuration  Output format Regardless of the input resolution of the Encoder or IP camera, the Decoder system of the VS-102-HDSDI can display video format as follows; NTSC (720 x 480)  PAL (720 x 576) ...

  • Page 55: Network Configuration

    VS-102-HDSDI User Manual 3.Network Configuration The Network page of the Decoder has a section for specifying the remote system to connect to. 55/61 IP Server Instruction Manual...
  • Page 56 VS-102-HDSDI User Manual  Remote Type Normal: Connection for M arshall Encoder and D ecoder  RTSP/RTP: The Decoder system can make a connection though RTSP protocol and get the stream  via RTP. It is also possible to make a connection with other vendors' H.264 IP cameras supporting standard RTSP/RTP and a standard H.264 algorithm.
  • Page 57 VS-102-HDSDI User Manual  Use Streaming Server The Decoder system has settings to connect to the Encoder or IP Camera via the Streaming Server.  Connect to the Encoder or IP Camera via Streaming Server. Use Streaming Server on the Remote group on the Network page should be set to On and information on the Streaming Server (SS) needs to be configured appropriately.

  • Page 58: Display Configuration

    VS-102-HDSDI User Manual 4. Display Configuration  Disconnection The Decoder system‟s output mode on a disconnected state can be configured.  Freeze: Video image of the last frame is shown when there is a disconnection. Black Screen: The Black Screen is shown when there is a disconnection.

  • Page 59: Appendix

    VS-102-HDSDI User Manual Appendix 1. Appendix A : Sensor and Alarm Port  Sensor Port  Terminal Type - Voltage Rating: 150VAC - Current Rating : 2A - Color : Red  Sensor Signal Input Type - NO Contact Signals ...
  • Page 60 VS-102-HDSDI User Manual  Alarm Port  Terminal Type - Voltage Rating: 150VAC - Current Rating : 2A  Relay Type - Contact Rating: 1A 30VDC - Switching Power: Max 30W 62.5VA - Switching Voltage: Max 60VDC  Alarm Signal Output Type - NO/NC Contact Signals ...

  • Page 61: Appendix B: Serial Port

    VS-102-HDSDI User Manual 2. Appendix B : Serial Port  RS-232 Port  Port Type -3 PIN -Pin Arrangement -Pin Description Pin NO Pin Name Description RS232 TX(Transmit) RS232 RX(Receive) Ground  RS-422/485 Port  Port Type -4 PIN -Pin Diagram -Pin Description Pin No.
  • Page 62 Click below to find more Mipaper at www.lcis.com.tw Mipaper at www.lcis.com.tw...

Table of Contents