Setting Up The Player For Your Tv; Setting The Language Of This Player's On-Screen Displays; Playing Discs - Pioneer DV-270 Operating Instructions Manual

04 Getting started
Note
• From here on in this manual, the word
'select' generally means use the cursor
buttons to highlight an item on-screen,
then press ENTER.
Setting up the player for your
TV
If you have a widescreen (16:9) TV, you should
setup the player so that the picture will be
presented correctly. If you have a conevntional
(4:3) TV, you can leave the player on the default
setting and move on to the next section.
1 Press HOME MENU and select 'Initial
Settings'.
2 Select 'TV Screen' from the 'Video
Output' settings.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
3 If you have a widescreen (16:9) TV,
select '16:9 (Wide)'
If you have a conventional (4:3) TV, you can
change the setting from 4:3 (Letter Box) to 4:3
(Pan & Scan) if you prefer. See Video Output
settings on page 31 for more details.
4 Press HOME MENU to exit the menu
screen.
16
En
Initial Settings
4:3 (Letter Box)
TV Screen
4:3 (Pan&Scan)
Component Out
16:9 (Wide)
S-Video Out
Setting the language of this
player's on-screen displays
This sets the language of this system's on-
screen displays.
1 Press HOME MENU and select 'Initial
Settings'.
Initial Settings
2 Select 'OSD Language' from the
'Display' settings.
Initial Settings
Digital Audio Out OSD Language
Video Output On Screen Display
Language Angle Indicator
Display
Options
3 Select a language.
The on-screen language will change according
to your selection.
4 Press HOME MENU to exit the menu
screen.

Playing discs

The basic playback controls for playing DVD,
CD, Video CD and MP3/WMA discs are
covered here. Further functions are detailed in
the next chapter.
For details on playing JPEG picture discs, see
Viewing a JPEG slideshow on page 21.
English
français
Deutsch
Italiano
Español