Table of Contents
Advertisement
• Press ; or ' to switch between Auto and User.
• TableStart is a start value of the variable in the table, and
TableStep is a step value of the variable. Both are numeric
values.
Example
Automatically create a table starting from
X-Y coordinate after equations, based on "Y1 = X", "Y2 = X
-
2
+
"Y3 =
X
3".
1. Press @ y and } _ 5 E 1 E.
2. Press t.
* If the cursor is on the top or
bottom line of the table, {
or } can still be used. The
table contents will move to
become visible in the display
area.
Example
Create a table in the User mode under the above conditions.
1. Press @ y and
' E } 0 E
1 E.
2. Press t.
Blank table will appear.
3. Press 2 E _ 3
E to enter X values.
* An automatically created table in the User mode cannot be
scrolled vertically.
Note:
While the table is in the User mode, a selected row can be deleted
by pressing D.
Chapter 4: Graphing Features
-
5 with a step of 1 in the
2
", and
95
Advertisement
Table of Contents
