Table of Contents
Advertisement
Chapter 4: Graphing Features
3. Once the initial anchor is set, move the cursor to a diagonal
4. The graph will automatically be redrawn.
3 In
A zoomed-in view of the graph will be displayed, sized according to
the B FACTOR set up under the ZOOM menu. For example, if the
vertical and horizontal zoom factors are set to "2", then the graph
will be magnified two times. Refer to the B FACTOR segment of
this section for more information.
4 Out
The graph image will be zoomed out according to the B FACTOR
setup under the ZOOM menu.
5 Default
The graph will be displayed with default graph setting (Xmin =
Xmax = 10, Xscl = 1, Ymin =
6 Square
Set the same scale for X and Y axes. The Y-axis scale is adjusted
to the current X-axis scale. The graph will be redrawn automatically.
7 Dec
Sets the screen dot as 0.1 for both axes. The graph will then be
redrawn automatically.
8 Int
Sets the screen dot as 1.0 for both axes. The graph will then be
redrawn automatically.
9 Stat
Displays all points of statistical data set.
76
corner to define the box area. When the required area is
squared off, press E.
If a mistake is made, the anchor can be removed by pressing
the C key.
-
10, Ymax = 10, Yscl = 1)
-
10,
Advertisement
Table of Contents
