Sub Settings; Changing Sub Settings - Sonos CONNECT:AMP Product Manual

Sonos Controller for Mac or PC

SUB Settings

The SUB's settings are determined during the initial setup process. If you wish to make changes, follow the steps below to
adjust how the SUB works with the associated Sonos component or stereo pair.

Changing SUB Settings

Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings.
2.
Select the room that is associated with the SONOS SUB. It appears as Room (+SUB) on the Room Settings menu.
3.
Select the SUB tab.
4.
Choose one of the following options:
5.
• SUB: Check to turn the sound from the SUB on; uncheck to turn it off.
• SUB Level Adjustment: Use the slider to increase or decrease the volume of the SUB. (You can use this setting to match
the subwoofer level to the level of your main speakers.)
• Placement Adjustment (phase): Check or uncheck the On box to adjust the phase.
• Speaker Size Adjustment (Crossover): This setting only appears when the SUB is associated with a CONNECT:AMP
(ZonePlayer 120) or ZonePlayer 100. You may wish to choose a different setting from the drop-down list if:
• the main speakers sound distorted at high volumes—moving to a smaller speaker size setting can help.
• your attention is drawn to the SUB's location while listening to music—moving to a larger speaker size setting can
help.
1 Compact
2
3
4 Bookshelf / Ceiling
5
6 Floor
7
110 Hz
100 Hz
90 Hz
80 Hz
70 Hz
60 Hz
50 Hz
2-9