Turning Off White Status Light; Equalization (Sound Settings) - Sonos CONNECT:AMP Product Manual

2-8

Turning Off White Status Light

A white light displays on the front of most Sonos components to indicate that the unit is functioning in normal operation. If
you have a Sonos component located in a bedroom, you may want to turn this indicator light off so that when the unit is in
normal operation, the white light does not display.
If the Status indicator light begins to flash amber, see "Player Status Indicators" on page A-6 for additional information.
Choose one of the following:
1.
• Using the Sonos Controller for PC, select Manage -> Settings.
• Using the Sonos Controller for Mac, select Sonos -> Preferences -> Room Settings.
To change a BRIDGE or a DOCK, select BRIDGE Settings or DOCK Settings.
Select the room you wish to change from the Room Settings for drop-down list.
2.
On the Basic tab, uncheck the White Status Light On box.
3.

Equalization (Sound Settings)

You can change the sound settings (treble, bass, loudness, or balance) for individual Sonos components.
Note: The loudness setting is designed to compensate for normal changes in the ear's
sensitivity at low volumes — you can turn this setting on to boost certain frequencies,
including bass, at low volume.
Select a room from the ROOMS pane, and then click
1.
If you selected a group in the ROOMS pane, choose an individual room from the list that appears.
Drag the sliders to increase or decrease the bass, treble, or balance.
2.
Check the Loudness box, if desired.
3.
You can select another room from the Room Settings for drop-down list and change its sound settings.
Note: These settings are not available when a Sonos component's Line-Out Level is set to
Fixed. See "Line-out" on page 2-13 for more information.
.
Product Guide