Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rifton K170
Summary of Contents for Rifton K170
- Page 1 Dynamic Stander (32") K170 Product Manual...
-
Page 2: Table Of Contents
Technical Users For professionals who order and set up Rifton products. Home Users For clients and care-givers who use Rifton products on a regular basis. Maintenance Personnel For anyone who is responsible for service or re-ordering of Rifton products and parts. -
Page 3: Warnings And Important Information
• Please save this Product Manual. Additional copies are available www.rifton.com • Please refer to the Rifton product catalog for our full warranty, or visit www.rifton.com To order replacement parts Locate the serial number of the product on the small white label. -
Page 4: Recommended Use
Your Dynamic Stander comes fully assembled. If your shipment is incomplete, please call Customer Service. User and item Dimensions User Dimensions – Inches (cm) K110 K130 K150 K170 Height 25 -32 (64-81) 30-40 (76-102) 37-52 (94-132) 48-65 (122-165) Key User Dimension: Height Select the appropriate Dynamic Stander by the user’s overall height. -
Page 5: Adjustments
adjustments See Figure 1 and 2. Use knobs (A) to adjust body support up and down. Always adjust body support height and tighten both knobs (A) before the child is in the stander. Use 4 knobs (B) to adjust width of body support. -
Page 6: Operation
operation To safely place a child in the Dynamic Stander, immobilize the unit by applying the wheel locks. Release snap hooks or buckles on one side of seat pad and center strap of seat pad, allowing seat pad to swing out of the way. Release one side of top strap and swing it out of the way. -
Page 7: Sandals & Wedges
Large Pair of Sandals & Wedges (K174) Recommended Use The K174 Pair of Sandals With Wedges is designed for use with the K170 Dynamic Stander, 32". The sandals, straps, and wedges position and hold feet firmly on a wide platform to encourage standing. -
Page 8: Additional Seat Pad
The K135 Additional Small Seat Pad and the K155 Additional Large Seat Pads are designed for use with the K150 Dynamic Stander, 25" and K170 Dynamic Stander, 32" The seat pad provides support for the full range of weight bearing, and is adjusted to accommodate sitting to standing positions. -
Page 9: Arm Prompt Set
It stimulates the child to raise his/her head. The K173 Large Mounting Bracket is needed to use the K132 Arm Prompt Set and/or the K188 Communication Tray on the Rifton K15 and K17 Dynamic Standers. -
Page 10: Communication Tray
Loosen knob (C) to completely remove • This accessory is intended for use the tray from the Dynamic Stander. on this Rifton Product. The Tray Insert can be removed by pressing fingers upward through the CAUTION holes. Re-install the insert by placing the tabs in the slots at the bottom of the •... -
Page 11: Maintenance
Maintenance Periodically inspect for cracks, breaks, loose parts, missing parts, and/or malfunctions. Remove the product from service when any condition develops that might make operation unsafe. Twice a year, perform the following maintenance: • Apply a drop of oil to the caster bearings and wheel axle. •... - Page 12 Contact info online Phone www.rifton.com 800.571.8198 Sales@rifton.com 9–5 EST Mail 800.85.7 Rifton Equipment PO Box 260 Rifton NY 12471– 0260...
Need help?
Do you have a question about the K170 and is the answer not in the manual?
Questions and answers