LG HBS-760 User Manual page 6

How to Use
Auto Reconnect
- The headset and handset will automatically reconnect when the HBS-760 is
turned back on while in range.
- The secondary handset need to be connected via selecting LG HBS760 from the
list of devices at Bluetooth menu.
Out of range
- If the paired devices are separated by a range of 10 meters(33 feet) or more, the
headset and handset will disconnect and HBS-760 will vibrate to alert.
* If vibrate is set to off by sliding the VOLUME switch to the + position and hold for
2 seconds, HBS-760 will not vibrate.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefly press the CALL button on the HBS-760 to
reconnect manually.
* It is possible to use these functions only when your handset supports them. For
further information about using these features, please consult your handset's
user manual.
- While in multi-connection and streaming, the inactive paired device, which is
out of range, will be disconnected. The HBS-760 will alert once with no attempt
to reconnect.
Calling
Answering a call / Ending a call
- When there is an incoming call, the headset will ring and vibrate.
* HBS-760 will not vibrate if vibration function is on 'off'.
- Briefly slide the VOLUME switch to the - position to stop the vibration.
- Briefly press the CALL button.
Transferring a call
- While on a call on your handset, press the PLAY/PAUSE/STOP button twice
on the HBS-760 to transfer the audio either from headset to handset or from
handset to headset.
6