White-Balance, Luminance Adjustment - Dell E1909Wc Service Manual

19" LCD Color Monitor
10.White balance, Luminance adjustment
Approximately 2 Hours should be allowed for warm up before proceeding White-Balance
adjustment.
Before started adjust white balance, please setting the Chroma-7120 MEM. Channel 3 to 6500
0
Channel 9 to 5700 K （6500 parameter is x =313±28, y=329±28, Y = 200 ±20 cd/m
328 ±28, y = 344 ±28, Y = 200 ±20 cd/m
How to setting MEM.channel you can reference to chroma 7120 user guide or simple use " SC" key and " NEXT"
key to modify x, y, Y value and use "ID" key to modify the TEXT description Following is the procedure to do
white-balance adjust
Enter into the factory mode:
Keep the power off first ,then press "menu" and "+" key simultaneously and turn on monitor.
Gain adjustment:
Move cursor to "-Factory Setting-" and press MENU key to enter this sub-menu.
Move cursor to " Factory" and press MENU key.
Move cursor to " Auto Level" and press MENU key to adjust Gain and Offset automatically;
0
a. Adjust cool (6500 K) color-temperature
1. Switch the chroma-7120 to RGB-mode (with press "MODE" button)
2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120)
3.The LCD-indicator on chroma 7120 will show x = 313 ±28, y = 329 ±28, Y = 200 ±20 cd/m
4. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100
6. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
7. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2
0
b. Adjust warm (5700 K) color-temperature
15. Switch the chroma-7120 to RGB-mode (with press "MODE" button)
16. Switch the MEM.channel to Channel 9 (with up or down arrow on chroma 7120)
17. The LCD-indicator on chroma 7120 will show x = 328 ±28, y = 344 ±28, Y = 200 ±20 cd/m
18. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
19. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100
20. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
21. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2
22. Move cursor to " Exit/Save" sub-menu and press MENU key to save adjust value and exit.
Turn the POWER-button off to on to quit from factory mode.
2
)
51
Dell E1909Wc
0
K colors, MEM.
2
, and 5700 parameter is x =
2
2