Pioneer SCSI-2 Reference Manual page 182

CM Command
?T Time Request
TM Time Mode
TR Track Mode
n VL Volume
?X CDP Model
?Z Disc Query
ZO Eject Magazine
ZR Disc Return
n ZS Disc Select
Player Command Error Messages
Return Error
R (GOOD)
E00 Communication Error
E04 Feature not Available
E06 Missing Argument
E11 Disc not Present
E12 Address Error
E13 Focus Error
E14 Spindle Unlocked
E16 Eject Received
E90 Panic - Mechanical
E91 Can't Eject Magazine
E92 Can't Load
E96 Can't Start
E99 Panic
Drive Action (continued)
Returns a four digit string representing the current time in MMSS format. In
Park mode, XXXX is returned. 0000 is returned when the current address is in
the lead-in area.
Sets the addressing mode to Time mode. All subsequent addresses must be in
MMSS format.
Sets the addressing mode to Track Mode. All subsequent addresses must be in
TT format, specifying a track number.
Sets the audio playback level, from 0 to 255.
Returns the revision of the CDP ROM Example: "P150801"
Returns a three digit number representing the currently loaded disc. If there is no
disc loaded, "XXX" will be returned.
Ejects the magazine.
Unloads the currently loaded logical unit (tray).
Loads disc n (1-6). After the disc is loaded, the drive goes into Park mode.
Explanation
The command completed successfully.
Error in command, command too long
Unusable command, wrong mode, bad track
A required parameter was not supplied
No disc loaded, magazine not inserted
Search address not found
Focus lost (Hardware problem)
The spindle is not locking
Front panel Eject button pressed before command finished
A non-recoverable error has occurred in a mechanical operation such
as loading.
Drive was unable to spin-up the disc
A non-recoverable operational error has occurred.
B-III
Appendix B