Pioneer SCSI-2 Reference Manual page 181

CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C)
CM Command
IX Index Mode
?K Disc Status Request Returns an eight character string representing the attributes of the currently
n KL Key Lock
LO Lead Out
NF Scan Forward
NR Scan Reverse
?O Read ISRC
?P Mode Request
PA Pause
PL Play
?Q TOC Request
?n Q TOC Request
?R Track Request
RJ Reject
SA Start
a SE Search
a SM Stop Marker
Drive Action (continued)
Sets the addressing mode to Index mode. All subsequent addresses will be
interpreted as indices.
loaded disc.
N1: Disc Loaded 0: No
N2: Audio Track 0: Not Present 1: Present
N3: Data Track 0: Not Present 1: Present
N4: CDV 0: No
N5: CD-I 0: No
N6-8: Reserved
Enables or disables the front panel eject button. n = 0: Enabled. n = 1:
Disabled
Lead Out Address
Scans forward about 15 seconds, with audio attenuated by 12 dB.
Scans backwards about 15 seconds, with audio attenuated by 12dB.
Returns the 15 digit International Standard Recording Code for the current track.
(DRM-604X series only)
Returns three digit string representing player mode: P00 - Home (No Magazine),
P01 - Park Mode, P04 - Play Mode, P06 - Pause Mode, P20 - Home Mode
(Magazine Inserted)
Enters Pause mode at the current address.
Enters Play mode and begins audio play.
Returns TOC data as a 10 digit string (FFLLEEEEEE), where FF represents the
first track, LL represents the last track number, and EEEEEE represents the lead-
out address in MMSSFF format.
Returns TOC data for track n as an eight digit string (EEEEEETT), where
EEEEEE represents the absolute start address of the track in MMSSFF format,
and TT represents the track type. 00 means audio, 04 means data.
Returns a two digit string representing the current track. In Park mode, XX is
returned. 00 is returned when the current address is in the lead-in area, an AA
when in the lead-out area.
Stops the disc and enters Park mode.
Starts disc rotation. The drive will pause at the beginning of the first audio
track.
Searches to address a and enters Pause mode.
Sets a stop marker at address a. When the stop marker is reached, the drive
enters Pause mode. Stop markers are cleared by CL and RJ commands.
B-II
(N1
1: Yes X:
X:
X:
1: Yes X:
1: Yes X:
(All X)
- N8)
Unknown
Unknown
Unknown
Unknown
Unknown