Download Print this page

Advertisement

Revo 4000
Stringing Machine
• 360° Racquet Rotation
• Diamond-dusted swivel clamps with
dial adjustments
• Spring-Action Locking Levers
• 6-Point "Wide-Stretch" Mounting Arms
• Linear String Gripper
• Crank Tension Mechanism
• Reversible Crank Handle
• Convenient Tool Storage Area
1
ALPHA SPORTS 1-800-922-9024

Advertisement

loading

Summary of Contents for Alpha Revo 4000

  • Page 1 Revo 4000 Stringing Machine • 360° Racquet Rotation • Diamond-dusted swivel clamps with dial adjustments • Spring-Action Locking Levers • 6-Point “Wide-Stretch” Mounting Arms • Linear String Gripper • Crank Tension Mechanism • Reversible Crank Handle • Convenient Tool Storage Area...
  • Page 2 GENERAL INFORMATION WARRANTY The Revo 4000 has a 5-year limited warranty. The string clamps have a 2-year limited warranty. The limited warranty pertains to any parts deemed defective by the manufacturer. MAINTENANCE • The string clamps will have to be cleaned on a regular basis.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS I. DIAGRAM..........4 II. COMPONENT PARTS LIST....5 III. MOUNTING THE FRAME.....6 IV. PREPARATION OF STRINGING..8 STRINGING THE FRAME....9 VI. CALIBRATION OF THE MACHINE..14 VII. CLAMP BASE ADJUSTMENT....16 ALPHA SPORTS 1-800-922-9024...
  • Page 4: Diagram

    DIAGRAM ALPHA SPORTS 1-800-922-9024...
  • Page 5: Component Parts List

    LOCKING LEVER CATCHER MOUNTING ARM ADJUSTMENT KNOB STRING GRIPPER LOCKING LEVER TENSION HEAD TENSION ADJUSTMENT KNOB TENSION ARM REVERSIBLE TENSION CRANK TENSION HEAD COVER BRAKE KNOB TABLE TOP BASE TOOL TRAY VISE POST LOCKING KNOB MOUNTING SYSTEM BASE ALPHA SPORTS 1-800-922-9024...
  • Page 6: Mounting The Frame

    Not doing this will allow the mounting arms to creep forward during the stringing process and cause damage to the racquet. NOTE: Both mounting arms are identical, the racquet can be mounted either way. ALPHA SPORTS 1-800-922-9024...
  • Page 7 The fit should be snug. Turn the mounting arm adjustment knobs so that the angled frame support the fit up against the frame. The fit should be snug, but use caution. NOTE: Over-tightening can cause premature stress on the frame. ALPHA SPORTS 1-800-922-9024...
  • Page 8: Preparation Of Stringing

    (16L, 17, or 18) then the string clamp may need to be tightened. If the string gauge is thick (15, 15L, or 16) then the string clamp may need to be loosened. ALPHA SPORTS 1-800-922-9024...
  • Page 9: Stringing The Frame

    Your tension setting is now 62 pounds. NOTE: When the machine is not in use, release the tension on the spring by setting back down to 9 pounds. ALPHA SPORTS 1-800-922-9024...
  • Page 10 1st left main and the first hole on the right would be the 1 right main. Thread the two ends of the main strings through the 1 left main and the 1 right main. Do this at the throat of the racquet. ALPHA SPORTS 1-800-922-9024...
  • Page 11 Keep rotating until the latch “pops” out and activates the brake. This will keep the tension head in place and allow you to release the string clamp so that it can be repositioned. ALPHA SPORTS 1-800-922-9024...
  • Page 12 “pinch” it. Rotate the tension head forward towards the racquet. When stringing the mains, alternate by pulling one main on each side. Never pull two mains at one time. ALPHA SPORTS 1-800-922-9024...
  • Page 13 “notching”. When the crosses are completed, tie off and trim the excess string. To release the racquet, release the pressure on the mounting knobs by loosening the adjustment knobs counter clockwise. ALPHA SPORTS 1-800-922-9024...
  • Page 14: Calibration Of The Machine

    TIP: Make sure the clamp is positioned far enough from the tension head to allow a proper pull. Read the tension on the calibrator to determine if the tension is correct. ALPHA SPORTS 1-800-922-9024...
  • Page 15 IMPORTANT: Release the tension on the calibrator before making the adjustments. Repeat the process until the correct tension is pulled. Lock the locking screw so that the adjustment screw is secure. ALPHA SPORTS 1-800-922-9024...
  • Page 16: Clamp Base Adjustment

    Take the 3mm allen key and insert into the internal adjustment screw. Turn clockwise to increase tension. The ideal locking position for the lever should be down the center of the swivel base. ALPHA SPORTS 1-800-922-9024...