Accessories - Bosch PCP6A.B Series Instruction Manual

Hide thumbs Also See for PCP6A.B Series:
Table of Contents

Advertisement

It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to
work correctly. Do not swap the burner caps around.
Always remove the pan supports carefully. When
moving a pan support, the pan supports next to it may
also move.
Elements
1
Ignition plug
2
Thermocouple
3
Burner cup
4
Burner cap

Accessories

Depending on the model, the hob may include the
following accessories. These can also be acquired from
the Technical Assistance Service.
Additional wok grid
Only suitable for use on wok
burners. Use cookware with a
rounded base.
Additional espresso maker
grid
Only suitable for use on the
smallest burner. Use cookware
with a diameter of less than
12 cm.
Getting to know your appliance
--------
Code
HEZ298107 Additional wok grid: Cast iron (4-5 kW)
HEZ298108 Additional wok grid: Cast iron (mini wok
burner)
HEZ298110 Additional wok grid: Enamelled steel
HEZ298115 Additional espresso maker grid
HEZ298105 Simmer Plate
HEZ211310 Simmer cap
The manufacturer accepts no liability if these
accessories are not used or are used incorrectly.
Simmer plate
This accessory part is only suita-
ble for simmering. It can be
used with the economy burner
or the standard-output burner. If
your hob has several standard-
output burners, we recommend
placing the simmer plate on the
rear or front-right standard-out-
put burner.
Place the accessory component
with the projections facing
upwards on the holder; never
place it directly on the burner.
Simmer cap
Burner cap that is used only
when cooking at minimum out-
put. The simmer cap must be
placed on the cover for the
economy burner.
en
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents