Appendix A Specifications; Network Camera; Regulatory Approvals - Sercomm RC8221V2 User Manual

Appendix A
Specifications

Network Camera

Model
Dimensions
Operating Temperature
Video compression
Image resolution
Storage Temperature
Network Protocols
Network Interface
Wireless interface
LEDs
Micro-SD Card slot
Power Adapter

Regulatory Approvals

FCC Statement
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

Consult the dealer or an experienced radio/TV technician for help.
Network Camera
63mm (W) x 95mm (H) x 35mm (D)
0 C to 50 C
H.264, MPEG4 and MJPEG
1280x 720, 640x480 (720p system default), 320x 240 (QVGA),
160 x 120 (QQVGA)
-20 C to 70 C
TCP/IP, HTTP, HTTPS, DHCP, NTP, SMTP, UPnP, FTP,
RTP/RTSP
1 Ethernet 10/100BaseT (RJ45) LAN connection
IEEE 802.11n/802.11b/802.11g compatible, Infrastructure/Ad-
hoc mode, WEP 64/128 bit, WPA/WPA2 personal security
support
3
1
12V/1A, 100~240 VAC
A
85