Huawei UMG181 Quick Start Manual page 9

3. Follow the prompts of the installation wizard.
4. After the program is installed, the shortcut icon of the management program is displayed on
the desktop of your PC.
Launching the Management Program
After the UMG181 is installed, the management program is launched automatically. Then every time
the UMG181 is connected to the PC, the management program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the management program.
Uninstalling the Management Program
1. On your PC, select Start > Control Panel.
2. Find the management program, and click Add/Remove Program to uninstall the management
program.
Note:
It is recommended that you restart the PC after the uninstallation to ensure that the management
program is completely uninstalled.
Removing the UMG181
1. Double-click
2. Select the hardware related to the UMG181 and click Stop.
3. When the prompt "It is safe to remove the device" is displayed, remove the UMG181.
In this way, the integrity of the data stored on the SD card can be ensured.
Note:
Before removing the UMG181, exit the management program.
in the system tray. The Unplug or Eject Hardware interface is displayed.
7